Teac LE42C9FHD User Manual page 18

OSD Menu
3. CHANNEL Menu
This menu selection contains scanning preferences (either automatic or manual tuning),
Channel, Auto Scan, Manual Scan, Channel Edit, Signal Information.
Settings can be altered for individual channels.
Description
Press the MENU button once to enter CHANNEL setup menu as shown above. Press OK to enter
the submenu. In the CHANNEL setup menu press the
the MENU button to return to the previous menu. Press the EXIT button to exit.
If Lock is enabled, Auto and Manual Scan are password protected. Key in the correct password.
(Default password: 0000)
Auto Scan
Press OK to enter the auto scan option.
Select the desired Country and Tune Type
buttons, then press OK to
using the
start scanning.
NOTE:
If ATV+DTV option is selected, the first 50%
of the scan will be for ATV tuning, while the
second half would be for DTV tuning. If
desired, the user has the option to exit the
tuning process midway by pressing the EXIT
button.
NOTE: Some menus are
available only in DTV Mode
while recording is not in
progress.
buttons to select the desired item. Press
15