Dip Switches; Level Increase Of The Headphone Output; Attenuate The Sensitivity Of The Vu Meters - SPL Phonitor x User Manual

DIP switches

With the DIP switches (20) on the bottom of the unit the following settings can be chosen:

Level increase of the headphone output

By using the DIP switches 1 and 2 you can increase the level of the headphone outputs to better feed power-hun-
gry headphones.
DIP switch 1: ON = The headphone output is boosted to +22 dB.
DIP switch 2: ON = The headphone output is boosted to +12 dB.
DIP switch 1 and 2: ON = If both DIP switches 1 and 2 are ON, a boost of +24 dB is applied.

Attenuate the sensitivity of the VU meters

With DIP switch 3 you can attenuate the sensitivity of the VU meter by 10 dB. With the switch activated, a value of
+15 dB input level can be displayed.
DIP switch 3: ON = The sensitivity of the VU meter is attenuated by 10 dB. In this case 0 dB on the VU meter
represent a value of +10 dBu.
I F R B
26