Controls And Status Information Indicators - Verilux ClearWave CWST2RB Instruction Manual

Controls and Status Information Indicators

Controls
a. Power Button
b. Head Latch Buttons
c. Adapter Input Port
Status Indicators
d. Information Display
e. Battery Life Indicator Lights
f. Interchangeable Head Life Indicator Lights
Information Display Indicators
Display
Number Operating
Number
0
– – –
LO
HP
CP
Interchangeable Head Life Indicator and Battery Life Indicator
Interchangeable Head Life Indicator Light
3 lights
2 lights
1 light
Flashing light
How to Check the Status of Your Device
• Pressing the Power Button on the device body when the device is not operating will
immediately place the device in Status Mode .
• The device will remain in Status Mode for half a second, then will automatically turn off .
• The Information Display will show the number of cycles remaining on the Interchangeable
Head before replacement is required .
• The Interchangeable Head Life Indicator and the Battery Life Indicator Lights will display
the respective status of the Interchangeable Head and battery charge level (see status
indications table above) .
• Placing the device in the Charging Stand will also activate Status Mode .
Mode
Idle Number of care cycles remaining on head
Idle
Interchangeable Head is not correctly attached
Device is above the optimal operating temperature
Device is below the optimal operating temperature
More than 75% of head life remaining
25% to 75% of head life is remaining
Less than 25% of head life is remaining
Head needs to be replaced
Percentages are approximate
Explanation
Time remaining on current care cycle
Interchangeable Head is exhausted
Battery is low
7
b.
a.
d.
e.
f.
c.
Battery Life Indicator Light
More than 75% of the battery is charged
25% to 75% of the battery is charged
One more care cycle
Battery needs to be charged
Reference
Page 10
Page 13
Page 13 or 15
Page 13 or 15
Page 11 or 15
Page 12 or 15
Page 12 or 15