Controls And Status Information Indicators - Verilux ClearWave CWST2RB Owner's Manual

Controls and Status Information Indicators

Controls
a. Power Button
b. Head Latch Buttons
Status Indicators
c. Information Display
d. Battery Life Indicator Lights
e. Interchangeable Head Life
Indicator Lights
Information Display Indicators
Display Mode
Number Operating
Number Idle
0 Idle
– – –
LO
HP
Interchangeable Head Life Indicator and Battery Life Indicator
Interchangeable Head Life Indicator Light
3 lights More than 75% of head life remaining
2 lights 25% to 75% of head life is remaining
1 light Less than 25% of head life is remaining
Flashing light Head needs to be replaced
How to Check the Status of Your Device
• Pressing the Power Button on the device body when the device is not operating will
immediately place the device in Status Mode.
• The device will remain in Status Mode for half a second, then will automatically turn off.
• The Information Display will show the number of cycles remaining on the
Interchangeable Head before replacement is required.
• The Interchangeable Head Life Indicator and the Battery Life Indicator Lights will
display the respective status of the Interchangeable Head and battery charge level.
(See status indications table above.)
• Placing the device in the Charging Stand will also activate Status Mode.
Explanation
Time remaining on current care cycle
Number of care cycles remaining on head
Interchangeable Head is exhausted
Interchangeable Head is not correctly attached
Battery is low
Device requires cooling
7
Reference
Page 10
Page 13
Page 15
Page 13 or 15
Page 14 or 15
Page 12 or 15
Battery Life Indicator Light
More than 75% of the battery is charged
25% to 75% of the battery is charged
Less than 25% of the battery is charged
Battery needs to be charged
b.
a.
c.
d.
e.