Toro 03675 Operator's Manual page 35

Understanding the Warning System
If a warning light comes on during operation, stop the
machine immediately and correct the problem before
continuing operation. Serious damage could occur if you
operate the machine with a malfunction.
Mowing Grass
Start the engine and move the throttle to the Fast position.
Move the Enable/Disable switch to the Enable position and
use the Lower Mow/Raise lever to control the cutting units
(the front cutting units are timed to lower before the rear
cutting units). To move forward and cut grass, press the
traction pedal forward.
Note: Allow the engine to idle for 5 minutes before shutting
it off after a full load operation. Failure to do so may lead to
turbo-charger trouble.
Driving the Machine in Transport Mode
Move the Enable/Disable switch to the Disable position and
raise the cutting units to the transport position. Move the
Mow/Transport lever to the transport position. Be careful
when driving between objects so you do not accidentally
damage the machine or cutting units. Use extra care when
operating the machine on slopes. Drive slowly and avoid
sharp turns on slopes to prevent roll overs. Lower the cutting
units when going downhill for steering control.
35