Table of Contents
Advertisement
117–0169
1. Read the Operator's Manual.
2. Power point—10 amp
3. Head lights—10 amp
4. Power—10 amp
5. Engine start—15 amp
6. Optional air ride seat suspension—20 amp
7. Engine computer management C—7.5 amp
8. Engine computer management B—7.5 amp
9. Engine computer management A—7.5 amp
110-8869
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—slow machine before turning, do not turn
at high speeds; lower the cutting unit when driving down
slopes; use a roll over protection system and wear the seat
belt. Always wear a seat belt when a ROPS is in place.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine and
remove the ignition key before leaving the machine.
5. Warning—read the Operator's Manual, do not tow the
machine.
(Affix over part no. 110–8869 for CE*)
* This safety decal includes a slope warning required on the machine for
compliance to the European Lawn Mower Safety Standard EN ISO 5395:2013. The
conservative maximum slope angles indicated for operation of this machine are
prescribed by and required by this standard.
1. Warning—read the Operator's Manual, do not operate this
machine unless you are trained.
2. Thrown object hazard—keep bystanders a safe distance
from the machine.
3. Tipping hazard—do not operate on slopes greater than 15°;
lower the cutting decks when operating on slopes; wear
the safety belt.
4. Warning—do not park the machine on slopes; engage the
parking brake, lower the cutting decks, stop the engine and
remove the ignition key before leaving the machine
5. Warning—read the Operator's Manual before towing the
machine.
1. Warning—read the
instructions before
servicing or performing
maintenance.
10
110-8973
93-6688
2. Cutting hazard of hand or
foot—stop the engine and
wait for moving parts to
stop.
Advertisement
Table of Contents
