Toro 03675 Operator's Manual page 24

Front Backlap Reel Speed
Rear Backlap Reel Speed
Protected Menus
Blade Count
Mow Speed
Height of cut (HOC)
F Reel RPM
R Reel RPM
* Only "operator-faced" text is translated. Faults, Service, and
Diagnostics screens are "service-faced". Titles will be in the
selected language, but menu items are in English.
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menu
There are 5 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter: Blade
Count, Mow Speed, Height of Cut (HOC), F Reel RPM,
and R Reel RPM. These settings can be locked by using the
Protected Menu.
Note: At the time of delivery, the initial password code is
programmed by your distributor.
Controls the speed of the front
reels in backlap mode.
Controls the speed of the rear
reels in backlap mode.
Allows the
superintendant/mechanic
to access protected menus by
inputting a passcode.
Controls the number of blades
on the reel for reel speed.
Controls the ground speed for
determining the reel speed.
Controls the height of cut
(HOC) for determining the reel
speed.
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.
Accessing the Protected Menu Settings
To access the Protected Menu Settings
•
From the Main Menu, scroll down to the Settings Menu
and press the right button.
•
In the Settings Menu, scroll down to the Protected Menu
and press the right button.
•
To enter the passcode, use the center button to set the
first digit then press the right button to move on to the
next digit.
•
Use the center button to set the second digit then press
the right button to move on to the next digit.
•
Use the center button to set the third digit then press the
right button to move on to the next digit.
•
Use the center button to set the fourth digit then press
the right button.
•
Press the middle button to enter the code.
•
If the code has been accepted and the protected menu has
been "Unlocked", "PIN" will be displayed in the upper
right corner of the display screen.
The ability to view and change the settings in the Protected
Menu can be changed. Once the Protected Menu has been
accessed, scroll down to Protect Settings. Using the right
button, changing Protect Settings to OFF will allow the
ability to view and change the settings in the Protected Menu
without entering the passcode. Changing Protect Settings to
ON will hide the protected options and will require entering a
passcode to change the setting in the Protected Menu. After
the pass code has been set, the key switch must be turned off
and back on to enable and save this feature.
Note: If the passcode has been forgotten or misplaced,
please contact your distributor for assistance.
Setting the Blade Count
•
In the Settings Menu, scroll down to Blade Count
•
Press the right button to change the blade count between
5, 8, or 11 blade reels.
Setting the Mow Speed
•
In the Settings Menu, scroll down to Mow Speed.
•
Press the right button to select mow speed.
•
Use the center and right button to select the appropriate
mow speed set on the mechanical mow speed limiter on
the traction pedal.
•
Press the left button to exit mow speed and save the
setting.
Setting the Height of Cut (HOC)
•
In the Settings Menu, scroll down to HOC.
•
Press the right button to select HOC.
24