Radio Indications Of Lost Bluetooth Connection - Motorola APX 8000XE User Manual

Obstacles that can cause an obstruction in the line-of-
sight include trees, buildings, mountains, cars and
etc.
It is not recommended that you leave your radio
behind and expect your accessory to work with a high
degree of reliability when they are separated.
At the fringe areas of reception, both voice and tone
quality will start to sound "garbled" or "broken". To
correct this problem, simply position the accessory
and radio closer to each other (within the 10 meter
defined range) to re-establish clear audio reception.
Note:
Once a COTS headset is paired to your radio,
it is always connected. Therefore the battery
life of the accessory is aligned with the Talk
Time power consumption, not the Standby
Time consumption.
Turn on the accessory. Then, place it close to the
radio aligning the Bluetooth Pairing Location (a
blue dot) on the radio to the Bluetooth Pairing
Location (a blue dot) on the accessory.
If the pairing process is successful, you hear an
incremental-pitched tone. The radio begins to
connect to the device.
72
English
If the pairing process fails, you hear a short, low-
pitched tone. The display shows PAIRFAIL.
Repeat this step.
The radio tries to establish connection with the device
once paired.
Note:
If the connection fails within 6 seconds, you
hear a decremental-pitched tone to indicate
that the device is unpaired. The display shows
<Device Type> UNPAIRED. Repeat this step to
re-initiate the pairing process.
If the connection is successful, you hear an
incremental-pitched tone. The display shows <Device
Type> CONNCTED and the Bluetooth icon turns from
to .
If the radio has the pairing record of the device and
the connection fails, you hear a short, low-pitched
tone. The display shows <Device Type> CON FAIL.

Radio Indications of Lost Bluetooth Connection

The radio shows when the device has a Bluetooth
connection. Below is the scenario and radio
indications when the connection is interrupted.