Turning On Bluetooth; Turning Off The Bluetooth; Re-Pair Timer - Motorola APX 8000XE User Manual

• Headset (HSP)
• Dial Up Networking (DUN)
• Personal Area Networking (PAN)
• Serial Port (SPP)
• Generic Access Profile (GAP)

Turning On Bluetooth

Turning on the Bluetooth via the preprogrammed
button:
a) Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary BT ON, and
appears.
If Bluetooth fails to launch, the display shows
BT ON FL.

Turning Off the Bluetooth

Turning off the Bluetooth via the preprogrammed
button:
a) Press the preprogrammed button to turn off the
Bluetooth.
You hear a short, medium-pitched tone. The
display shows momentary BT OFF and
disappears.

Re-Pair Timer

There are two options for configuring the Bluetooth
pairing type of the radio. The type defines the
duration the radio and the accessory retain the
pairing information.
Immediate (For MCW accessories only.) When the
radio and/or device is turned off after
pairing, the keys are lost. Due to this,
when your radio and your device are
turned on again, they are unable to re-
connect. The user must re-pair the
devices to re-establish a new set of
pairing keys. See
Frequency-Motorola Proximity Pairing
(LF-MPP) Feature
Standard Pairing Feature
Infinite (For all Bluetooth devices.) When the
radio and/or device are turned off after
pairing, keys are not lost. When the
radio and the device are turned on
Pairing with Low
on page 71 and
on page 73.
69
English