Peer-Location On The Display (Astro Conventional Only) - Motorola APX 8000XE User Manual

Peer-Location on the Display (ASTRO Conventional
only)
This feature is only available for radio-to-radio voice
transmissions, dispatch call and selective call in
conventional ASTRO system. For radio-to-radio
transmission, in order to allow the radio to show peer-
location, the voice should be directly sent from one
radio to another radio without passing through any
infrastructure facility such as repeaters, phone or
DVRS system. Both the transmitting radio and
receiving radio must be configured to enable them to
send and/or receive the GPS coordinates. You can
check with your nearest qualified technician for more
details.
Note:
If the receiving radio is operating in a Mixed
Mode channel, only if its voice transmission is
via conventional ASTRO system then it can
receive the location coordinates of its peers.
This feature is also operable in a Scan Active channel
or Scan Talkback channel.
Upon receiving a voice transmission with GPS
coordinates enabled on the receiving radio, the
display shows the coordinates available in full or in
66
short coordinates. There are two different formats
English
available. Refer to the following list for the details
shown in the Peer-Location quick text. Consult your
agent to pick the best format to configure to your
radio.
Full location
• PTT ID (This is optional.)
coordinates
• Longitude and latitude
• Relative distance or
direction.
Short location
• PTT ID (This is optional.)
coordinates
• Longitude and latitude
Note:
If the transmitting radio is stale at its location
after a period of time, the receiving radio
display shows ID:<PTT ID> LKL:
<Coordinates> <distance>. If the radio is not
configured to show PTT ID, you see LAST
KNWN LOC: <Coordinates> <distance>.
If the transmitting radio does not have GPS or
the receiving radio could not decode the GPS
signal of the received signal, the receiving
radio display shows ID:<PTT ID> UNK LOC.