Editing; Dubbing To A Vcr; Dubbing To Or From A Video Unit Equipped With A Dv Connector (Digital Dubbing) - JVC GR-D760EK Instructions Manual

Dubbing To A VCR

To use this camcorder as a player
1
Following the illustration, (
"Connections To A TV Or VCR", connect the
camcorder and the VCR's input connectors.
2
Perform steps 1 – 6 (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual).
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 15)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "ON" or "OFF". (
Or, press DISPLAY on the remote control to turn
on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON". (
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 37)
pg. 23)
pg. 24).
pg. 37)
pg. 37)
Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little, if any, image or sound
deterioration.
Core filter
Video unit equipped with DV connector
* For GR-D770EK only
To use this camcorder as a player
1
Make sure all units are turned off.
2
Connect this camcorder to a video unit
equipped with a DV input connector using a DV
cable as shown in the illustration.
3
Start playback on the camcorder. (
4
At the point you want to start dubbing, start
recording on the video unit. (Refer to the video
unit's instruction manual.)
5
To stop dubbing, stop recording on the video
unit, then stop playback on this camcorder.

EDITING

43
EN
To DV IN*/OUT
DV cable
(optional)
To DV IN/OUT
pg. 22)
CONTINUED ON NEXT PAGE