Manual White Balance Adjustment; Wipe Or Fader Effects; Program Ae, Effects And Shutter Effects - JVC GR-D760EK Instructions Manual

FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of
lighting is used.
[ ]Factory-preset

Manual White Balance Adjustment

Adjust the white balance
manually when shooting
under various types of
lighting.
1
Set the Power Switch
to "REC".
2
Set the recording mode to "M". (
3
Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
4
Select "MWB" in "W.BALANCE" menu.
( pg. 34), then press and hold SET or
begins blinking.
● When the setting is completed,
blinking.
5
Press SET or to engage the setting.
6
Press MENU. The Menu Screen closes and
the Manual White Balance indicator
displayed.
NOTES:
● In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
( pg. 39)
● Because the coloured temperature is different
depending on the light source, use the function for
a more natural result.
● Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
● White Balance cannot be activated
simultaneously with "TWILIGHT" in "PROGRAM
AE" ( pg. 42).
● White Balance cannot be activated if the "SEPIA"
or "MONOTONE" mode is activated.

Wipe Or Fader Effects

These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "REC".
3
Set the recording mode to "M". (
4
Set "WIPE/FADER" in
( pg. 34)
5
White paper
Press the Recording Start/Stop Button to
activate the Fade-in/out or Wipe-in/out.
pg. 21)
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
until
WIPE/FADER
stops
OFF: Disables the function. (Factory-preset)
WHITE
BLACK
SLIDE
is
from left to right.
SCROLL
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
Program AE, Effects and Shutter
Effects
1
Set the Power Switch to "REC".
2
Set the recording mode to "M". (
3
Set "EFFECT", "PROGRAM AE" or
"SHUTTER" in "FUNCTION" Menu. (
● The selected effect will be shown for approx. 2
seconds before the camcorder returns to the
menu screen.
NOTES:
● Shutter Effects cannot be used during "NIGHT".
● When a subject is too bright or reflective, a vertical
streak may appear (smear phenomenon). Smear
phenomenon tends to occur when "SPORTS" or
mode of "SHUTTER 1/500 and 1/4000" is
selected.
FEATURES FOR RECORDING
"FUNCTION" Menu
: Fade in or out with a white screen.
: Fade in or out with a black screen.
: Wipe in from right to left, or wipe out
: The scene wipes in from the
CONTINUED ON NEXT PAGE
41
EN
pg. 21)
.
pg. 21)
pg. 34)