Individual Outputs/Inserts; Use As Individual Output - Vermona DRM1 MKIII User Manual

Individual Outputs/Inserts

Each instrument channel offers a dedicated individual output/insert with a choice of possible
applications. Crucial to the outputs' function is the cable being used, or to be more exact, the pin-
assignment of the connector being placed in the output jack.

Use as individual output

The OUT jack
⑤
1. By using a standard TS-cable, the signal will be automatically excluded from the main
outputs:
2. By using a special cable with a TRS connector on one side and a TS connector on the other,
the signal will additionally remain present on the main output:
Figure 10: Tip and ring of the TRS connector will need to be connected here.
20
can be used as an individual out in two ways.
Figure 9: A simple TS (mono)- cable