Vermona DRM1 MKIII User Manual page 17

controls the mixture between the noise part and the multiple, detuned oscillators.
MIX
Turned fully counterclockwise, only the noise component will be audible, turned
fully clockwise, only the oscillator mixture will be audible, allowing for more
"authentic" sounds, due to the metallic sound.
defines the pitch/frequency of the oscillator mix as well as for the ATTACK impulse.
PITCH
☛
HI HAT 1 and HI HAT 2 can be triggered in two versions, using the TRIG
button
hat has a fixed, short decay time, independent of the DECAY control. After
switching on the DRM1 MKIII, the TRIG button
cymbal/open hi-hat, with the sound's length being defined by DECAY. To
toggle the trigger-modes, press and hold TRIG
The corresponding LED will light up shortly to confirm the operation.
By using MIDI, both sounds of these instrument channels, cymbal/open hi-hat
and closed hi-hat, can be played by different MIDI notes. Here, the dependency
between the two sounds on one channel is automatically reflected (see "MIDI
Functions" on page 18).
16
- either as cymbal/open hi-hat or as closed hi-hat. The closed hi-
②
defaults to trigger the
②
for approx. two seconds.
②