Reset; Factory Defaults - Vermona DRM1 MKIII User Manual

☛
Both methods allow assigning multiple instrument channels to the same MIDI
note number. In this scenario the sounds will be commonly triggered.
☛
Since both HI HAT instrument channels allow the triggering of two sounds
(open and closed hi-hat), the HI HAT instrument channels will automatically be
assigned to two note numbers. The note number being sent to the DRM1 MKIII's
HI HAT instrument channels assigns the open hi-hat/cymbal sound. The closed
hi-hat is automatically assigned to a note number two semitones (equals two
MIDI notes) below the open hi-hat. Therefore, pay attention to keep that position
unoccupied when assigning note numbers to other sounds of the unit.

Reset

While in learn-mode, the DRM1 MKIII restores its factory defaults when no note numbers are
received before switching the unit off.

Factory Defaults

Channel
KICK
DRUM 1
DRUM 2
MULTI
SNARE
HI HAT 1 closed
HI HAT 1 open/CYMBAL
HI HAT 2 closed
HI HAT 2 open/CYMBAL
CLAP
User Guide DRM1 MKIII
MIDI note number on MIDI channel 10
36 (C)
48 (c)
41 (F)
58 (b)
40 (E)
49 (cis)
51 (dis)
42 (FIS)
44 (GIS)
39 (DIS)
EN
19