Before You Begin To Use Secure Function Lock 2.0 - Brother DCP-9020CDN Advanced User's Manual

Chapter 2
Before you begin to use
Secure Function Lock 2.0
You can configure the Secure Function Lock
2.0 settings using a web browser. Before
configuration, the following preparations are
needed.
a
Start your web browser.
b
Type "vmachine's IP address/" into
your browser's address bar (where
"machine's IP address" is the IP address
of your Brother machine).

For example:
v192.168.1.2/
NOTE
You can find the machine's IP address in
the Network Configuration List (see
Network User's Guide: Printing the
Network Configuration Report).
c
Type a password in the Login box. (This
is a password to log on to the machine's
web page, not the administrator
password for Secure Function Lock.)
Click .
6
NOTE
If you are using a web browser to
2
configure the machine's settings for the
first time, set a password.
1 Click
Please configure the password.
2 Type a password (up to 32 characters).
3 Re-type the password in the
Confirm New Password field.
4 Click Submit.