Pro-Form PFTL496140 User Manual page 13

8. Identify the Right Base Cover (91) and the Left
Base Cover (88). Slide the Right Base Cover
onto the Right Upright (85). Slide the Left Base
Cover onto the Left Upright (84).
9. Hold the Right Handrail (83) near the Right
Upright (85). Position the Upright Wire (87) on
the Right Handrail as shown.
See the inset drawing. Set the Right Handrail
(83) on the Right Upright (85). Make sure that
the Upright Wire (87) is positioned as shown
and is not pinched.
Attach the Right Handrail (83) to the Right
Upright (85) with three 5/16" x 1" Screws (4) and
three 5/16" Star Washers (13) as shown; do not
fully tighten the Screws yet.
Attach the Left Handrail (not shown) in the
same way. Note: There is no wire on the left
side.
8
84
88
9
4
13
13
85
87
13
83
85
91
4
87
85