Table of Contents
Advertisement
38
REPEATING A SERIES OF KEY PRESSES USING
THE MACRO AND MACRO2 KEYS
The Home Producer has two Macro keys (MACRO
and MACRO2) that will play back a series of key
strokes at any time with the press of one key. Each
sequence can have up to a maximum of 15 key-
strokes. These keys are not mode specific and can be
accessed in any mode. For example, to set up a
sequence that will turn on devices and turn them to
the proper inputs:
1
Press and hold SETUP until the dis-
play screen changes from [DEVICE
x 2 and the TIME] to [TIMED SEQ].
Press MENU – twice until the display
reads [CONFIGURE], then press
SELECT. The display will then read
[THEATR SEL].
2
x 4 Press MENU – four times until the
display reads [KEY MACRO]. Press
SELECT. The display will read
[SEL MACKEY]. Press either the
MACRO or MACRO2 key. This will
be the key that will play back the
series of keystrokes assigned to
or
that key. The display will then read
[ENTER SEQ]. Begin entering the
sequence of keystrokes, up to 15.
NOTE: When setting up your sequence, you will need to include
any keystrokes that would normally be required during regular
usage, such as pressing ENTER after entering a channel number
when changing channels.
For example:
(sequence) TUNER + POWER + TV + POWER
+ TV/SAT (to change the input on
the TV to VIDEO 1) + SAT +
POWER.
3
When your macro sequence is con-
cluded, press ESC to save.
When the sequence key is pressed, the Tuner will
power ON, the TV will power ON and change its input
to VIDEO 1, and then the Satellite will power ON.
Repeat these steps 1 to 3 to setup another
sequence key (MACRO or MACRO2) for your needs.
NOTE: If you make a mistake during the setup of a macro
sequence, press ESC to return to the main display screen and
begin the setup of your sequence again.
HOW TO USE THE SHIFT KEY
The Home Producer has additional features that can
be accessed by using the SHIFT key. They are list-
ed above the keys that they are mapped to.
For example, on the transport keys PLAY, REW,
FF, STOP, and PAUSE, there are the following fea-
tures: SLOW, SLOW+, SLOW –, X2, and EJECT.
If you want to eject a tape from your VCR, press:
SHIFT + STOP
This will eject your tape, as long as your original
remote supported this feature.
NOTE: Once you have pressed the SHIFT key, Home Producer
will remain in the "Shift" mode, as indicated by an [S] on the LCD
screen, for 5 seconds after the last key press or until the SHIFT
key is pressed again.
The following keys have functions that are shifted:
CENTER:
SHIFT + CENTER = REAR
MENU:
SHIFT + MENU = PROGRAM
SELECT:
SHIFT + SELECT = CLEAR
MUTE:
SHIFT + MUTE = SLEEP
PREV CH:
SHIFT + PREV CH = DISPLAY
PIP:
SHIFT + PIP = FREEZE PIP
REW:
SHIFT + REW = SLOW-
PLAY:
SHIFT + PLAY = SLOW
FF:
SHIFT + FF = SLOW +
STOP:
SHIFT + STOP = EJECT
PAUSE:
SHIFT + PAUSE = X2
IMPORTANT: For a more detailed explanation of what function
each shifted key performs by device type (e.g., TV, VCR, etc.),
please refer to pages 52 through 64.
39
Advertisement
Table of Contents
