Maintenance And Storage - Toro 30436 Operator's Manual

The owner/user can prevent and is responsible for
accidents or injuries occurring to himself or herself,
other people or property.
Preparation
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Only use accessories and attachments
approved by the manufacturer.
Wear appropriate clothing including hard hat, safety
glasses and hearing protection. Long hair, loose
clothing or jewelry may get tangled in moving parts.
Inspect the area where the equipment is to be used and
remove all objects such as rocks, toys and wire which
can be thrown by the machine.
Use extra care when handling gasoline and other fuels.
They are flammable and vapors are explosive.
Use only an approved container
Never remove gas cap or add fuel with engine
running. Allow engine to cool before refueling.
Do not smoke.
Never refuel or drain the machine indoors.
Check that operator's presence controls, safety
switches and shields are attached and functioning
properly. Do not operate unless they are functioning
properly.
Operation
Never run an engine in an enclosed area.
Only operate in good light, keeping away from holes
and hidden hazards.
Be sure all drives are in neutral and parking brake is
engaged before starting engine. Only start engine from
the operator's position.
Be sure of your footing while using this machine,
especially when backing up. Walk, don't run. Never
operate on wet grass. Reduced footing could cause
slipping.
Slow down and use extra care on hillsides. Be sure to
travel side to side on hillsides. Turf conditions can
affect the machine's stability. Use caution while
operating near drop-offs.
Slow down and use caution when making turns and
when changing directions on slopes.
Never raise deck with the blades running.
Never operate with the PTO shield, or other guards not
securely in place. Be sure all interlocks are attached,
adjusted properly, and functioning properly.
Never operate with the discharge deflector raised,
removed or altered, unless using a grass catcher.
Do not change the engine governor setting or
overspeed the engine.
Stop on level ground, disengage drives, engage
parking brake (if provided), shut off engine before
leaving the operator's position for any reason
including emptying the catchers or unclogging the
chute.
Stop equipment and inspect blades after striking
objects or if an abnormal vibration occurs. Make
necessary repairs before resuming operations.
Keep hands and feet away from the cutting unit.
Look behind and down before backing up to be sure of
a clear path.
Keep pets and bystanders away.
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop blades if not
mowing.
Be aware of the mower discharge direction and do not
point it at anyone.
Do not operate the mower under the influence of
alcohol or drugs.
Use care when loading or unloading the machine into
or from a trailer or truck.
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.

Maintenance and storage

Disengage drives, set parking brake, stop engine and
remove key or disconnect spark plug wire. Wait for all
movement to stop before adjusting, cleaning or
repairing.
Clean grass and debris from cutting unit, drives,
mufflers, and engine to help prevent fires. Clean up oil
or fuel spillage.
Let engine cool before storing and do not store near
flame.
Shut off fuel while storing or transporting. Do not store
fuel near flames or drain indoors.
Park machine on level ground. Set parking brake.
Never allow untrained personnel to service machine.
Use jack stands to support components when required.
Carefully release pressure from components with
stored energy.
4