Maintenance; Recommended Maintenance Schedule(S) - Toro 30446 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 250 hours
Every 400 hours
Maintenance Procedure
• Torque the wheel lug nuts.
• Check the alternator belt tension.
• Check the compressor belt tension.
• Check the blade drive belt tension.
• Change the engine oil and filter.
• Check the engine speed (at idle and full throttle).
• Change the front planetary gear oil.
• Change the rear axle oil.
• Change the hydraulic oil.
• Change the hydraulic oil filters.
• Check the engine oil level.
• Check the coolant level.
• Check the hydraulic fluid level.
• Check the tire pressure.
• Check the air cleaner indicator
• Check the interlock switch operation
• Lubricate all grease fittings.
• Inspect the air cleaner.
• Check the blade drive belt tension.
• Clean the air conditioning screen. (Clean more frequently in extremely dusty or
dirty conditions)
• Remove all debris and chaff from the radiator and oil cooler.
• Inspect the cooling system hoses and clamps.
• Check the alternator belt tension.
• Check the compressor belt tension.
• Change the engine oil and filter.
• Torque the wheel lug nuts.
• Service the spark arrestor muffler.
• Clean the cab air filters. (Replace them if they are torn or excessively dirty.)
• Clean the air conditioning coil. (Clean more frequently in extremely dusty or dirty
conditions)
• Check the planetary gear drive oil.
• Check the rear axle lubricant.
• Check the rear axle gear box lubricant.
• Service the air filter (if the indicator shows red).
• Inspect the fuel lines and connections.
• Replace the fuel filter canister.
• Check the engine speed (at idle and full throttle).
33