Maintenance Service
Interval
Every 800 hours
Every 2 years
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Service Interval Chart
Maintenance Procedure
• Drain and clean the fuel tank.
• Change the front planetary gear oil.
• Change the rear axle oil.
• Check the rear wheel toe-in.
• Inspect the blade drive belts.
• Change the hydraulic oil.
• Change the hydraulic oil filters.
• Inspect the side cutting unit damper.
• Inspect the cutting unit castor wheel assemblies.
• Check and adjust the valve clearance.
• Flush the cooling system and replace fluid.
• Replace moving hoses.
Figure 35
34