Toro 30317 Operator's Manual page 47

(Figure 69). Remove damaged or worn grass
deflector.
Figure 69
1. Bolt
2. Spacer
3. Locknut
4. Spring
2. Place spacer and spring onto grass deflector.
Place the L end of spring behind deck edge.
Note: Make sure the L end of spring is
installed behind deck edge before installing the
bolt as shown in Figure 69.
3. Install bolt and nut. Place the J hook end of
spring around grass deflector (Figure 69).
Important: The grass deflector must be
able to rotate. Lift the deflector up to the
full open position and ensure that it rotates
into the full down position.
5. Spring installed
6. Grass Deector
7. L end of spring, place
behind deck edge before
installing bolt
8. J hook end of spring
47