Installing The Usb Driver (Plug And Play) - Meteor Manuale Compact 400 Plus Manual

Note:
1. If you are updating the driver, previous driver files are
overwritten automatically.
2. If you install new bar code application software such as
ArgoBar, LabelView or CodeSoft, you may activate the
Label Dr. 200 (or Label Dr. 300) driver and set it as the
current printer driver:
3. If you install new bar code application software such as
Bartender Ultra Lite, you should activate the seagull
driver for Argox printer.
·
ArgoBar
File New Select Printer
·
LabelView
File Select Printer Label Dr. on LPT1:
·
CodeSoft
File Printer Windows Label Dr. on LPT1:
·
LabelMatrix
File Printer Setup Label Dr. on LPT1:
·Nicelabel
File→ Printer Setup →Label Dr. on LPT1: → OK
·Bartender
File→ Printer Setup →Label Dr. on LPT1: → OK
Label Dr. on LPT1 OK
OK
OK
OK
31
www.meteorbarcode.it - info@meteorbarcode.it

11.3 Installing the USB Driver (Plug and Play)

Note:
The printer driver needs to install version 1.4.00 or later and
support "USB Plug and Play" for Windows XP, Windows 2003
and Windosw 2000.
1. Extract the PrinterDriver.exe to the fixed route. ("C:\Label Dr.
200", for example)
2. Connect the label printer to a computer with a USB cable.
3. Turn on the printer's power and the system detects the device
automatically.
4. Select "Install from a list or specific location (Advanced)", click
"Next".
32