Table of Contents
Advertisement
Product Overview
1. Track
2. Lift cylinder
3. Cylinder lock
Controls
Become familiar with all the controls (Figure 5) before
you start the engine and operate the traction unit.
1. Traction control
2. Loader arm/attachment tilt
lever
3. Auxiliary hydraulics lever
4. Reference bar
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
To start the engine, rotate the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
To stop the engine, rotate the key to the off position.
4. Loader arm
5. Hood
6. Auxiliary hydraulic couplers
Figure 5
5. Throttle lever
6. Choke lever
7. Key switch
Figure 4
7. Tilt cylinder
8. Mount plate
9. Control panel
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever
forward. After the engine starts, regulate the choke to
keep the engine running smoothly. As soon as possible,
move the choke lever all the way rearward.
Note: A warm engine requires little or no choking.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary hydraulics lever. To ensure
smooth, controlled operation, do not take both hands
off of the reference bar while operating the traction unit.
11
10. Rear access cover
11. Reverse safety plate
Advertisement
Table of Contents
