Lubrication
Greasing the Traction Unit
Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Lower the loader arm and stop the engine. Remove
the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting (Figure 41
through Figure 48).
4. Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5. Wipe up any excess grease.
Figure 41
Figure 42
Figure 43
26
Figure 44
Figure 45
Figure 46
Figure 47
Figure 48