Specifications - Makita FS4000 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock ring
2-1. Locking sleeve
3-1. Locator
4-1. Locator
5-1. Switch trigger
5-2. Lock button
6-1. Lamp
7-1. Reversing switch lever
8-1. Hook

SPECIFICATIONS

Model
Self drilling screw
Capacities
Drywall screw
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model
FS4000,FS4000X,FS4200,FS4300,FS4300X,
FS6300,FS6300R.FS6300X
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Explanation of general view
9-1. Lock ring
9-2. Gear housing
10-1. Locator
10-2. Bit
10-3. Gear housing
10-4. Magnetic bit holder
11-1. Locator
11-2. Locking sleeve
12-1. Locator
FS4000 FS4000X
-1
)
269 mm 284 mm
1.3 kg
noise level determined
) : 82 dB (A)
pA
) : 93 dB (A)
WA
FS4300/
FS4200
FS4300A
6 mm
5 mm
0 - 4,000
269 mm 279 mm
ENE033-1
Vibration
The vibration
determined according to EN60745:
ENF002-2
Model
FS4000,FS4000X,FS4200,FS4300,FS4300X,
FS6300,FS6300R.FS6300X
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
12-2. Bit
12-3. Magnetic bit holder
14-1. Lock button
16-1. Lock button
18-1. Swells
18-2. Trapezoidal holes
18-3. Locator holder
FS6300/
FS4300X FS6200
FS6300A
293 mm 269 mm 279 mm
1.4 kg
/II
total value (tri-axial
) : 2.5 m/s
h
2
FS6300R FS6300X
-
4 mm
0 - 6,000
279 mm 293 mm
ENG900-1
vector sum)
2
or less
ENG901-1