Download Print this page
Makita FS4300 Technical Information
Makita FS4300 Technical Information

Makita FS4300 Technical Information

Drywall screwdriver
Hide thumbs Also See for FS4300:

Advertisement

Quick Links

T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
The five models in the subject are drywall screwdrivers
well balanced for easy handling and maneuverability,
featuring the following main benefits;
Best possible tool body for screwdriving
One-touch locator
More durable belt clip
LED job light (except for FS4000)
See the table of "Specification" for the specification
differences between the five models.
FS4300, FS4200, FS4000 are also available with
plastic carrying case as
Model FS4300K, FS4200K, FS4000K.
S
pecification
Voltage (V)
110
120
220
230
240
Specification
No load speed: min.
Driving shank: mm (")
Capacity: mm (")
Silent clutch
Variable speed control by trigger
Reverse switch
LED job light
Protection against electric shock
Power supply cord
Net weight*: kg (lbs)
*Weight according to EPTA-Procedure 01/2003
S
tandard equipment
Phillips insert bit 2-25 .............................................................. 2
Magnetic connect bit 6.35-60 or 6.35-76 ............................... 1
Plastic carrying case (FS4300K, FS4200K, FS4000K only) ......... 1
Note: The standard equipment for the tool shown above may vary by country.
O
ptional accessories
Phillips insert bits 1-25, 2-25, 3-25
Magnetic connect bit 6.35-60
Magnetic connect bit 6.35-76
FS4300, FS4200, FS4200A, FS4200TP, FS4000
Drywall Screwdriver
Cycle (Hz)
Current (A)
5.5
50/60
6.0
50/60
2.7
50/60
2.6
50/60
2.5
50/60
Model
FS4300
= rpm
-1
Drywall screw
Self drilling screw
Type
Normal type
Europe: 4.0 (13.1) ,
Australia/ Chile/
: m (ft)
Length
Brazil: 2.0 (6.6),
Other countries: 2.5 (8.2)
1.4 (3.1)
FS4300
Length (L)
Width (W)
Height (H)
*for countries where noise suppressing device is required
to conform to regulations
Continuous Rating (W)
Input
570
---
570
570
570
FS4200
6.35 (1/4) Hex
Yes
No
Yes
Yes
Double insulation
Normal type
Europe: 4.0 (13.1),
Australia/
Brazil: 2.0 (6.6),
Other countries: 2.5 (8.2)
North America: 1.4 (3.0)
Other countries: 1.4 (3.1)
L
H
W
Dimensions: mm (")
FS4300
293 (11-1/2) 284 (11-1/8)
with connect bit 76
279 (11)
with connect bit 60
Max. Output (W)
Output
260
360
260
260
260
FS4200A
FS4200TP
0 - 4,000
5 (3/16)
6 (1/4)
No
No
Yes
Yes
Yes
Yes
by Grounding Double insulation
Twist lock plug type
Long type
15 (50)
15 (50)
PRODUCT
P 1/ 7
FS4200
FS4000
FS4200
FS4200A
FS4200TP
FS4000
269 (10-5/8)
65 (2-9/16)
192 (7-9/16)
207 (8-1/8)*
500
500
500
500
500
FS4000
No
No
Normal type
Europe: 4.0 (13.1),
Australia/
Brazil: 2.0 (6.6),
Other countries: 2.5 (8.2)
North America: 1.3 (2.8)
Other countries: 1.3 (2.9)

Advertisement

loading

Summary of Contents for Makita FS4300

  • Page 1 293 (11-1/2) 284 (11-1/8) with connect bit 76 Length (L) 279 (11) 269 (10-5/8) with connect bit 60 FS4300, FS4200, FS4000 are also available with Width (W) 65 (2-9/16) plastic carrying case as 192 (7-9/16) Model FS4300K, FS4200K, FS4000K. Height (H)
  • Page 2 Gear teeth (Place A: 2.5g) Cam portion (Place B: 1g) Contact portions (Designated by arrows: a little) * Lubricant VG100 to thread portion of Lock ring (Place C: a little) * Lubricant VG32 to Flat washers 8 (Place D: a little) for FS4300 only Fig. 1 A: 2.5g...
  • Page 3 P 3/ 7 epair [3] DIFFERENCE OF CLUTCH BETWEEN FS4000, FS4200(A/TP) AND AND FS4300 Fig. 2 FS4000 FS4000: Gear housing HP complete FS4200 FS4200, FS4200A, FS4200TP: Gear housing HNP complete FS4200A FS4300: Gear housing HSB complete FS4200TP Spindle 125N Compression spring 6...
  • Page 4 2) Assemble Thrust needle cage 821 and Washer 821 to the thick shaft side of Gear 41S complete. (Fig. 7) 3) Attach three Steel balls 4 on the reverse of Clutch cam 125S with Makita grease FA No. 2, and then assemble them to the thin shaft side of Gear 41S complete.
  • Page 5 P 5/ 7 epair [4]-2. Assembling of Ring spring 33 and Leaf spring 1) Face the ends of Ring spring 33 to the left side when holding the machine as illustrated in Fig. 10, and fit Ring spring 33 into the groove on Gear housing complete. 2) Face the ends of Leaf spring to the right side when holding the machine as illustrated in Fig.
  • Page 6: Circuit Diagram

    P 6/ 7 ircuit diagram Fig. D-1 (To connect with Field laminations) Color index of lead wires' sheath Black Areas where suppression of White radio interference is required Earth terminal Orange for Noise Field Blue suppressor Brush Brush Purple holder holder Transparent Choke coil...
  • Page 7: Wiring Diagram

    P 7/ 7 iring diagram Fig. D-2 Fix Lead wire of Earth terminal with Lead wire holders. (Earth terminal is not used for areas where suppression of radio interference is not required.) Fix Lead wire with Lead wire holders. Brush holder Brush holder Fix Lead wire with Lead wire holders.

This manual is also suitable for:

Fs4200Fs4200aFs4200tpFs4000