Real Time Clock - Toshiba Satellite A500 series User Manual

Real Time Clock

Problem
The following
message is displayed
on the LCD:
RTC battery is low or
CMOS checksum is
inconsistent. Press
[F2] key to set
Date/Time.
Password
Problem
Cannot enter
password
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to Chapter 5,
Problem
Output to screen is
garbled
Downloaded from LpManual.com Manuals
User's Manual
Procedure
The RTC battery charge has become exhausted,
you should set the date and time in within the
BIOS setup screen through the following steps:
1. Press [F2] key. BIOS setup will boot up.
2. Press [F5]/[F6] to set the date in [System
Date].
3. Press [F5]/[F6] to set the time in [System
Time].
Procedure
Please refer to the
section in Chapter 6,
Modes for further information.
The Keyboard
Procedure
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.
Troubleshooting
TOSHIBA Password Utility
Power and Power-up
for further information.
9-7