Toshiba Satellite A500 series User Manual page 127

■
■
■
■
■
Disclaimer
TOSHIBA does not bear responsibility for the following:
■
■
■
Given the technological limitations of current optical disc writing drives, you
may experience unexpected writing or rewriting errors due to disc quality or
problems with hardware devices. In view of this, it is good practice to make
two or more copies of important data, in case of any undesired change or
loss of the recorded contents.
Downloaded from LpManual.com Manuals
User's Manual
■
Install, remove or connect external devices, including such items as
a SD/SDHC memory card, miniSD/microSD Card, ExpressCard,
Memory Stick/Memory Stick PRO/Memory Stick PRO Duo, xD
picture card, MultiMediaCard, USB device, external monitor, i.LINK
device, or an optical digital device or BD drive.
■
Use the audio/video control button to reproduce music or voice.
■
Open the optical disc drive or BD drive.
Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (writing is completed if you
can remove an optical media on the DVD Super Multi drive or BD drive).
If the media is of poor quality, or is dirty or damaged, writing or rewriting
errors may occur.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Damage to any CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW,
DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM disc that may
be caused by writing or rewriting with this product.
Any change or loss of the recorded contents of CD-R, CD-RW, DVD-R,
DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),
DVD+RW, DVD-RAM or BD-R/RE media that may be caused by writing
or rewriting with this product, or for any business profit loss or business
interruption that may be caused by the change or loss of the recorded
contents.
Damage that may be caused by using third party equipment or
software.
Operating Basics
4-25