Toshiba Satellite A500 series User Manual page 102

Restoring the pre-installed software from your created Recovery
Discs
If the pre-installed files are damaged, you are able to either use the
Recovery Discs you have created or the hard disk drive recovery process
to restore the computer to the state it was in when you originally received it.
To perform this restoration, follow the steps below:
When the sound mute feature has been activated by pressing the FN +
ESC key, be sure to disable this to allow sounds to be heard before starting
the restore process. Please refer to Chapter
details.
You can not use System Recovery Options if restoring the pre-installed
software without System Recovery Options.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost.
1. Load the Recovery Discs into the optical disc drive and turn off the
2. While holding down F12 key on the keyboard, turn on your computer -
3. Use the up and down cursor keys to select the CD-ROM icon from the
4. A menu will be displayed from which you should follow the on-screen
When drivers/utilities are installed, you can setup the respective
drivers/utilities from following place. To open the setup files, Click Start
All Programs
Downloaded from LpManual.com Manuals
User's Manual
computer's power.
when TOSHIBA Leading Innovation>>> appears, release the F12
key.
menu. Please refer to the
and Passwords for further information.
instructions.
TOSHIBA
5,The
Boot Priority section in Chapter 7,
Applications and Drivers.
Getting Started
Keyboard, for further
HW Setup
3-15