Video Set Menu - Sony PMW-EX30 Operating Instructions Manual

Menu items
Audio Output
Setting for audio
outputs

VIDEO SET menu

Menu items
HDMI/CMPNT/SDI
Out SEL
Setting the HDMI/
component/SDI
outputs
The setting value in
parentheses is
displayed when
PAL format is
selected (when
"Country" is set to
"PAL Area").
86 Setup Menu List
Subitems and
setting values
Monitor CH
CH-1 / CH-2
(CH-3 / CH-4)
CH-1+CH-2
(CH-3+CH-4)
CH-1 (CH-3)
CH-2 (CH-4)
Output CH
CH-1,CH-2
CH-3,CH-4
Subitems and
setting values
1080i/720P
1080i
480i (576i)
480P (576P)
Description
Select the audio channel(s) to be output to
the headphones or the speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1+CH-2 (CH-3+CH-4): Mix
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
The "Output CH" setting determines which
pair of channels (CH-1 and CH-2 or CH-3
and CH-4) is used.
Select audio channels to be output through
the AUIDO OUTPUT CH-1/3 and CH-2/4
connectors, the headphones, or the HDMI
connector from either channels 1 and 2 or
channels 3 and 4.
Notes
• This item is disabled (displayed in grey)
when this unit is in recording or E-E mode
with the VIDEO INPUT switch set to HD
SDI or SG.
• Set this item to "CH-1,CH-2" when i.LINK
input is selected.
Description
Select the signals to be output from the
HDMI, COMPONENT and HD/SD SDI
OUTPUT connectors.
1080i/720P: HD signal recorded or played
back
1080i: 1080i signal (or 720P signal
converted to 1080i signal)
480i (576i): Down-converted SD signal
480P (576P): Down-converted SD
progressive signal
Note
This item is disabled (displayed in grey) and
the setting value is fixed to 480i (576i) when
the "i.LINK I/O Select" setting is "DVCAM".