Installing The Front Wheels; Installing The Steering Wheel; Installing The Bumper - Toro 07277 Workman 2110 Operator's Manual

Installing the Front Wheels

Note: This procedure is only needed for Model No.
07277TC.
1. Remove the fasteners securing the wheels.
2. Remove the shipping bracket from the spindles.
3. Mount the wheels with the previously removed
fasteners (Fig. 3) and torque the bolts to 45–65 ft.-lb.
(61–81 N⋅m)
2
3
1
Figure 3
1. Tire and wheel assembly
2. Spindle assembly

Installing the Steering Wheel

Note: This procedure is only needed for Model No.
07277TC.
1. Remove the nut and lock washer from the steering
shaft.
2. Slide the steering wheel and washer onto the shaft.
Position the steering wheel on the shaft so that the cross
beam is horizontal when the tires are pointed straight
ahead and the thicker spoke of the steering wheel is
downward.
3. Secure the steering wheel to the shaft with the nut
(Fig. 4).
4
3. Bolt
4. Nut
15
1
Figure 4
1. Steering wheel
2. Nut

Installing the Bumper

Note: This procedure is only needed for Model No.
07277TC.
1. Remove the 2 bolts, washers, and nuts secured to the
front of the frame.
2. Align the mounting holes and secure the bumper to the
frame with the fasteners previously removed (Fig. 5).
1
Figure 5
1. Bumper
2
3
4
3. Washer
4. Foam seal