Ski-Doo 2006 Mini Z Operator's Manual
  1. Manuals
  2. Brands
  3. Ski-Doo Manuals
  4. Offroad Vehicle
  5. 2006 Mini Z
  6. Operator's manual
Ski-Doo 2006 Mini Z Operator's Manual

Ski-Doo 2006 Mini Z Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 Mini Z and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ski-Doo 2006 Mini Z

Summary of Contents for Ski-Doo 2006 Mini Z

  • Page 2: Safety Warning

    Inc. or its subsidiaries. XP-S ® MINI Z SKI-DOO Printed in Canada. (mmo2006-002 DR) ®™ and the BRP loge are trademarks of Bombardier Recreational Products Inc. or its affiliates. ©2005 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
  • Page 3 Whatever model you have chosen, it is backed by the Bombardier Recreational Products Inc. (BRP) warranty and a network of autho- rized SKI-DOO snowmobile dealers ready to provide the parts, ser- vice or accessories you may require. The Operator's Guide has been prepared to acquaint the owner/operator with this new snowmobile and its various con- trols, maintenance and safe riding instructions.
  • Page 4 Although the mere reading of such information does not eliminate the hazard, the understanding and application of the information will promote the correct use of the vehicle. Your dealer is committed to your satisfaction. He has taken train- ing to perform the initial set-up and inspection of your snowmobile as well as completed the final adjustment required to suit your spe- cific weight and riding environment before you took possession.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION INTRODUCTION ..........NOTICE TO PARENTS .
  • Page 6 ® BRP LIMITED WARRANTY NORTH AMERICA: 2006 SKI-DOO SNOWMOBILES ..........86 BRP INTERNATIONAL LIMITED WARRANTY: 2006 SKI-DOO ®...

  • Page 7: Safety Information

    SAFETY INFORMATION ______ _____ SAFETY INFORMATION...

  • Page 8: Introduction

    We encourage you to have an Annual Safety Inspection of your snowmobile. Please contact an authorized SKI-DOO dealer for further details. Finally, we urge you to visit an authorized SKI-DOO dealer periodically for regular and safety main- tenance, as well as snowmobile accessories you may require.

  • Page 9: Notice To Parents

    NOTICE TO PARENTS Carefully read this Operator's Guide and understand the controls and operation of the snowmobile. Please take time with your child to review the entire content includ- ing the instructions on its safe proper use, while paying attention to the on-product safety labeling before allowing him to ride snowmo- bile.

  • Page 10: Important Basic Safety Measures

    IMPORTANT BASIC SAFETY MEASURES Training Basic training is required for the safe operation of any snowmo- bile. Study your Operator's Guide paying particular attention to cautions and warnings. Obtain basic instructions from your snow- mobile dealer, friend, fellow club member or enroll in your state or provincial safety training program.
  • Page 11 Snowmobiling at night can be a delightful experience but because of reduced visibility, be extra cautious. Avoid unfamiliar terrain and be sure your lights are working. Always carry a flashlight and spare light bulbs. Fences represent a very serious threat for both you and your snowmobile.
  • Page 12 Never run the engine in a non-ventilated area and/or if vehicle is left unattended. Never operate the engine without chain guard securely installed or, with hood or access/side panels open or removed. Never run the engine without drive chain installed. Running an unloaded en- gine such as without drive chain or with track raised, can be dan- gerous.
  • Page 13 Fuel Do not allow children to refuel the snowmobile. Always stop the engine before refueling. Fuel is flammable and explosive under certain conditions. Always work in a well- ventilated area. Do not smoke or allow open flames or sparks in the vicinity.

  • Page 14: Laws And Regulations

    LAWS AND REGULATIONS Know your local laws. Federal, state, provincial and local government agencies have enact- ed laws and regulations pertaining to the safe use and operation of snowmobiles. It is your responsibility as a snowmobiler to learn and obey these laws and regulations. Respect and observance will re- sult in safer snowmobiling for all.

  • Page 15: Riding The Vehicle

    RIDING THE VEHICLE Operate the snowmobile in a restricted flat area until you are com- pletely familiar with its operation and feel comfortable that you can safely tackle a more demanding task. Have an enjoyable and safe ride. Principle of Operation Propulsion Depressing throttle lever increases engine RPM causing the drive pulley to engage.

  • Page 16: How To Ride

    How to Ride How to Dress Proper snowmobile clothing should be worn. It should be comfort- able and not too tight. Always check the weather forecast before going on a ride. Dress for the coldest weather expected. Thermal underwear next to the skin also provides a good insulation. DOT approved helmets are recommended at all times.
  • Page 17 A31H14A FEET ON THE RUNNING BOARDS, KNEES AND HIPS FLEXIBLE A31H15A WRONG _____ _____ SAFETY INFORMATION...
  • Page 18 Kneeling This position is achieved by placing one foot firmly on the running board and the opposite knee on the seat. Avoid abrupt stops. A31H18A ONE FOOT ON THE RUNNING BOARD AND THE OPPOSITE KNEE ON THE SEAT Standing Place both feet on the running boards. Knees should be flexed to absorb the shock from surface bumps.
  • Page 19 A31H16A BOTH FEET ON THE RUNNING BOARD WITH KNEES FLEXED WARNING Be watchful of any overhead branches or other hazards. _____ _____ SAFETY INFORMATION...

  • Page 20: Carrying A Passenger

    Carrying a Passenger This vehicle is intended for one operator only no passenger. A31H17A WRONG _____ _____ SAFETY INFORMATION...

  • Page 21: People At Front

    People at Front Make certain your snowmobile is pointed away from people or ob- jects before you start it. No one is to be standing in front of or on back of the snowmobile. A31A0LA WRONG _____ _____ SAFETY INFORMATION...

  • Page 22: Signals

    Signals WARNING Always be careful of other snowmobiles ahead or near you. Stop or steer away from others. If you intend to stop, raise either hand straight above your head. A left turn is indicated by extending your left hand straight out in the proper direction.
  • Page 23 Left Turn A31H06A TYPICAL — TO INDICATE LEFT TURN _____ _____ SAFETY INFORMATION...
  • Page 24 Right Turn A31H07A TYPICAL — TO INDICATE RIGHT TURN _____ _____ SAFETY INFORMATION...

  • Page 25: Safety Labeling

    Ensure all such labeling is retained on the vehicle and its content is followed by vehicle operator and passenger. If missing or damaged, the decals can be replaced free of charge. See an authorized SKI-DOO dealer. Please read the following instructions carefully before operating this snowmobile.
  • Page 26 Instruction 1 A31A0MA _____ _____ SAFETY INFORMATION...
  • Page 27 Instruction 2 A31A0OA Instruction 3 516 001 297 A33A0HA _____ _____ SAFETY INFORMATION...
  • Page 28 _____ _____ SAFETY INFORMATION...

  • Page 29: Environment Information

    ENVIRONMENT INFORMATION __________________________...

  • Page 30: General

    GENERAL Wildlife compliments your snowmobiling day. Snowmobile tracks provide firm ground over which animals can travel from area to area. Do not violate this privilege by chasing or harassing wildlife. Fatigue and exhaustion can lead to animal's death. Avoid areas posted for the protection or feeding of wildlife.
  • Page 31 Light Treading refers to more than the thread of our tracks. It's a statement of concern, respect and willingness to take the lead and take action. It applies to the environment in general, its proper care and maintenance, its natural inhabitants and all enthusiasts and the public at large who enjoy the great outdoors.

  • Page 32: Just What Is Light Treading

    JUST WHAT IS LIGHT TREADING? The fundamental objective of Light Treading is one of respect for where and how you ride a snowmobile. You're a light treader when you follow the principles below. B B B B e e e e c c c c o o o o m m m m e e e e i i i i n n n n f f f f o o o o r r r r m m m m e e e e d d d d . Obtain maps, regulations and other information from the Forest Service or from other public land agencies.

  • Page 33: Why Is Light Treading Smart

    Finally, Light Treading is the sign of a smart snowmobiler. You don't have to leave big tracks or careen through a virgin forest to show you can ride. So whether you're driving a high performance Ski-Doo, a sporty MX-Z snowmobile or any other make or model, show you know what you're doing.
  • Page 34 _________________________...

  • Page 35: Child's Section

    CHILD'S SECTION __________________________...

  • Page 36: Snowmobile Description

    SNOWMOBILE DESCRIPTION A31H11A TYPICAL 1. Windshield 2. Hood 3. Front bumper 4. Skis 5. Track 6. Snow guard 7. Rear bumper 8. Seat _________________________...

  • Page 37: Clothing

    CLOTHING Always wear all appropriate protective clothing including an approved safety helmet. User(s) should be adequately clothed. Do not permit loose clothing which could be entangled in moving parts or get snagged on tree branches. A31A0IA 1. Safety helmet 2. Eyes protection (goggles or shield) 3.

  • Page 38: Snowmobile Controls

    SNOWMOBILE CONTROLS A31H12A 1. Throttle lever 2. Brake lever 3. Handlebar 4. Ignition switch 5. Tether cut-out switch 6. Engine cut-out switch 7. Rewind starter handle 8. Choke button 9. Hood latches _________________________...

  • Page 39: Throttle Lever

    Throttle Lever Squeezing the lever with your thumb will make the snowmobile go faster. Releasing the lever slows the snowmobile. WARNING Test the throttle lever operation each time before starting the engine. The lever must return to its original position once re- lease.

  • Page 40: Tether Cut-Out Switch

    A31E09A 1. ON 2. OFF Tether Cut-Out Switch When the tether cord cap is pulled off its switch post, the engine stops and prevents the snowmobile from running away if a throttle problem occurs or you fall off while riding. Always attach the tether cord to your clothing eyelet and install the tether cord cap on its post before starting the engine.

  • Page 41: Engine Cut-Out Switch

    WARNING Do not remove disk from tether cord. This safety device will unplug tether cord cap if hood is lifted. Engine will automati- cally stop. A31E0RA 1. Tether cut-out switch post 2. Tether cord cap 3. Do not remove this disk Engine Cut-Out Switch All drivers of the snowmobile should familiarize themselves with the function of this device by using it several times on first outing and...

  • Page 42: Rewind Starter Handle

    A31E0SA 1. ON 2. OFF Rewind Starter Handle Auto-rewind type located on right hand side of snowmobile. To en- gage mechanism, pull handle slowly until a resistance is felt then pull vigorously. Slowly release handle. Choke Button This device features a multi-position button to facilitate cold start. _________________________...

  • Page 43: Hood Latches

    A31C32A 1. Cold start 2. Warm start Hood Latches Hood latches are used to lock hood to its anchors. __________________________...

  • Page 44: Operating Instructions

    OPERATING INSTRUCTIONS Before You Start Always do a pre-start inspection with your parents or an adult before you turn on the ignition. Refer to PRE-OPERATION CHECK. Throttle Operate the throttle 2 or 3 times before you turn on the ignition. It must return freely to the idle or closed position, as shown.
  • Page 45 A31D05A CORRECT BRAKE LEVER POSITION BEFORE STARTING Visual Inspection Make certain hood is fastened with hood latches and remove any snow and ice buildup from lights, windshield and running boards. A31H13A LEFT SIDE SHOWN — HOOD LATCH IN FASTENING POSITION __________________________...
  • Page 46 Track Make sure the track is not frozen to the ground. To verify, lift rear of snowmobile or ask an adult to help. WARNING Do not attempt to lift the vehicle by hand alone. Use appro- priate lifting device or have assistance to share lifting stress in order to avoid risk of strain injuries.

  • Page 47: How To Start

    How to Start Never attempt to start the engine unless the throttle returns to its normal or idle position. Verify this before starting. Keep hands off of throttle when actually starting. Put on your safety helmet and attach tether cord to your clothing eyelet.
  • Page 48 Install tether cord cap on post. A31E0RB TETHER CORD CAP INSTALLED ON POST Turn the ignition key to the ON position. A31E01A TYPICAL — IGNITION KEY TO THE ON POSITION _________________________...
  • Page 49 Set engine cut-out switch to middle position. A31E0SB ENGINE CUT-OUT SWITCH TO MIDDLE POSITION Engage choke only if the engine is cold. A31C30A CHOKE IS ENGAGED FOR COLD ENGINE STARTING __________________________...
  • Page 50 Pull starter handle to start engine. A31C33A STARTER HANDLE IS PULLED Allow engine to warm then disengage choke before operating at full throttle. While the engine is warming, check the headlamp and the taillight, then set the engine cut-out switch to both extreme positions to be certain it will stop the engine.

  • Page 51: How To Stop

    How To Stop Before riding your snowmobile, you should understand how to stop Release the throttle and gradually depress the brake lever on the left side of the handlebar and then turn the ignition key to the OFF position. WARNING Always disconnect tether cord cap when leaving vehicle unat- tended and keep in a secured location.

  • Page 52: Emergency Stop

    Emergency Stop In an emergency, you may stop your vehicle by turning the engine cut-out switch located near the throttle control and applying the brake. A31E0VA BOTH OFF POSITION FOR EMERGENCY STOP Remember, a snowmobile cannot “stop on a dime”. Braking char- acteristics vary with deep snow, packed snow or ice.

  • Page 53: First Ride

    First Ride Under adult supervision, select an open snow covered area which is free of hazards. Push on throttle lever holding on to handlebar. A31C34A TO ACCELERATE __________________________...

  • Page 54: After Use

    Practice riding by using throttle lever to accelerate then brake lever to brake. A31D0XA TO BRAKE Go slowly and avoid all obstacles. After Use When you return from your ride, stop the engine and remove the tether cord cap from its post. Talk to your parents or the owner of the snowmobile about your ride.

  • Page 55: Parent'ssection

    PARENT'S SECTION __________________________...

  • Page 56: Vehicle Information

    These numbers are required by the authorized SKI-DOO dealer to complete warranty claims prop- erly. No warranty will be allowed by BRP if the engine serial number or the vehicle identification number (VIN) is removed or mutilated in any way.

  • Page 57: Recommended Fuel And Oil

    Engine Serial Number Location A31H0RA 1. Engine serial number Recommended Fuel and Oil Recommended Fuel Use regular unleaded gasoline, available from most service stations or oxygenated fuel containing a maximum total of 10% of ethanol or methanol or both. The gasoline used must have the following recommended minimum octane number.
  • Page 58 OCTANE NUMBER Inside North America 87 (R + M)/2 or higher Outside North America 91 RON or higher CAUTION: Never experiment with other fuels. The use of unrec- ommended fuel can result on snowmobile performance deteri- oration and damage to critical parts in fuel system and engine components.
  • Page 59 A31A0PA WRONG Recommended Oil Always maintain engine oil level with 4-stroke engine oil that meets or exceeds the requirements for API service classification SF or SG. Always check the API service label on the oil container to be sure it includes the letters SF or SG.

  • Page 60: Break-In Period

    10 hours of operation or 30 days after the pur- chase, whichever comes first, your snowmobile be checked by an authorized SKI-DOO dealer. This inspection will give you the oppor- tunity to discuss the unanswered questions you may have encoun- tered during the first hours of operation.

  • Page 61: Pre-Operation Check

    Pre-Operation Check WARNING The pre-operation check is very important prior to operating the vehicle. Always check the proper operation of critical con- trols, safety features and mechanical components before start- ing. If not done as specified here, severe injury or death might occur.
  • Page 62 • Check weather forecast: Will you be warm enough? • Make certain your snowmobile is pointed away from people or objects before you start it. No one is to be standing in front of or in back of the snowmobile. •...

  • Page 63: Starting The Engine

    Starting the Engine General • Re-check throttle operation. • Ensure that the engine cut-out switch is in the ON position. • Ensure the tether cord cap is installed on its post and that the tether cord is attached to child's clothing. •...

  • Page 64: Troubleshooting

    – Start engine following usual starting procedure. – If engine continues to flood, see an authorized SKI-DOO deal- 4. No fuel to the engine (spark plug dry when removed). – Check fuel tank level; turn fuel valve on, check condition of fuel and impulse lines and their connections.
  • Page 65 See item 5 of ENGINE TURNS OVER BUT FAILS TO START. 3. Ignition timing is incorrect or there is an ignition system fail- ure. – Contact an authorized SKI-DOO dealer. ENGINE MISFIRES 1. Fouled/defective/worn spark plug or wrong gap. –...

  • Page 66: Specifications

    Specifications MODEL MINI Z ENGINE Maximum power engine speed ± 100 RPM 4000 DRIVE BELT Number of links Pinch mm (in) 12.7 (.500) SPARK PLUG Type NGK BPR 6 ES ± 0.05 mm (± .002 in) 0.75 ( .030) TRACK Tension (in) (1-3/8) (1)

  • Page 67: Maintenance Information

    WEEKLY I: INSPECT L: LUBRICATE MONTHLY R: REPLACE ONCE A YEAR T: PROCEED WITH TASK STORAGE (1) (1) TO BE PERFORMED BY AN AUTHORIZED SKI-DOO PRESEASON DEALER PART/TASK LEGEND ENGINE Engine oil level Each use Engine oil change Every 6 months/100 h...
  • Page 68 WEEKLY I: INSPECT L: LUBRICATE MONTHLY R: REPLACE T: PROCEED WITH TASK ONCE A YEAR STORAGE (1) (1) TO BE PERFORMED BY AN AUTHORIZED SKI-DOO PRESEASON DEALER PART/TASK LEGEND DRIVE Drive and driven sprockets Clutch and chain Retorquing of clutch...
  • Page 69 C: CLEAN WEEKLY I: INSPECT L: LUBRICATE MONTHLY R: REPLACE T: PROCEED WITH TASK ONCE A YEAR STORAGE (1) (1) TO BE PERFORMED BY AN AUTHORIZED SKI-DOO PRESEASON DEALER PART/TASK LEGEND ELECTRICAL (2) Before Spark plugs (2) installing new Engine timing...

  • Page 70: General

    General NOTE: All maintenance should be done by an adult or an autho- rized SKI-DOO dealer and according to these directions as well as the MAINTENANCE CHART. Do not allow children to lift hood to attempt repairs or maintenance. A31A0NA...
  • Page 71 With snowmobile on a level surface, check the oil level by removing dipstick at engine base. Oil level must reach the top of the oil filler neck. If not, refill up to oil filler neck using SAE 5W30 recommended for general use. NOTE: For improved overall performance and wear protection use XP-S 0W 40 synthetic 4-stroke oil (P/N 293 600 054).

  • Page 72: Drive System

    A31C0CA 1. Proper oil level WARNING Whenever checking oil level or refilling, be careful not to over- fill. Wipe off any spillage. Exhaust System The tail pipe of the muffler should be centered with the exit hole in the bottom pan. It must be free of rust or leaks. The exhaust system is designed to reduce noise and to improve the total performance of the engine.
  • Page 73 WARNING When removing chain guard, ensure that engine is not run- ning. A31C35A CHAIN GUARD 1. Retaining screws __________________________...
  • Page 74 Clutch Axle and Drive Chain Lubrication Clutch Axle Lubrication Remove chain guard. Find connecting link (inner side of chain), then separate chain. Re- move chain from clutch sprocket. NOTE: Do not remove chain from driven sprocket. Chain may be difficult to install. Remove clutch retaining screw and slide out the clutch.
  • Page 75 A31D0KC TYPICAL 1. Rotation 2. Inner side of chain Drive Chain Lubrication With chain properly installed on both sprockets, spray aerosol chain oil over the chain. CAUTION: Always lubricate drive chain slightly. Oil must not contact brake pads. Drive Chain Tension Snowmobile is equipped with an automatic tensioner.
  • Page 76 Brake Adjustment Fully apply brake with brake lever. If brake lever is not within 15 to 20 mm (19/32 to 25/32 in) of the handlebar, readjust brake. A31D03A 1. Brake lever A. 15 to 20 mm (19/32 to 25/32 in) To adjust brake, loosen Allen screw then pull on brake cable.
  • Page 77 Always reinstall chain guard. Do not operate engine with hood opened or chain guard removed. Improper servicing, modification or poor adjustment may affect sprockets perfor- mance and life. Always obtain authorized SKI-DOO dealer advice before servicing or modifying the drive or driven sprockets. Always respect maintenance schedules.
  • Page 78 , rotate the track by hand, and inspect condition. If worm or cut, or if track fibers are exposed, or if missing or defective inserts or guides are noted; contact an authorized SKI-DOO dealer. WARNING Do not modify track, including the installation of traction en- hancing products.
  • Page 79 A31D0YA A. 7.3 kg (16 lb) B. 60 mm (2-3/8 in) C. 35 mm (1-3/8 in) CAUTION: Too much tension will result in power loss and exces- sive stresses on suspension components. To adjust tension: – Loosen the rear idler wheel retaining screws. –...
  • Page 80 If correct tension is unattainable, contact an authorized SKI-DOO dealer. A31F0IA 1. Adjustment screw 2. Loosen lock nut 3. Loosen screw Alignment NOTE: Track tension and alignment are interrelated. Do not adjust one without the other. WARNING Before checking track alignment, ensure that the track is free of all particles which could be thrown out while track is rotating.
  • Page 81 A31F01A TYPICAL 1. Guides 2. Slider shoes 3. Equal distance To correct, stop the engine : Loosen the lock nuts and tighten the adjustment screw on side where the slider shoe is the farthest from the track guides. A31F02A TYPICAL 1.

  • Page 82: Rear Suspension

    A31F0IB 1. Retighten lock nuts 2. Retighten rear idler wheel retaining screws Restart engine and rotate track slowly to recheck alignment. Reposition snowmobile on the ground. Rear Suspension Condition Visually inspect all suspension components including slider shoes, springs, wheels, etc. NOTE: During normal driving, snow will act as a lubricant and coolant for the slider shoes.

  • Page 83: Steering And Front Suspension

    If necessary, contact an authorized SKI-DOO dealer. Wear and Condition of Skis and Runners Check the condition of the skis and runners. If worn, contact an authorized SKI-DOO dealer. WARNING Excessively worn skis and/or ski runners will affect adversely snowmobile control.
  • Page 84 Wax the hood and the painted portion of the frame for better protec- tion. NOTE: Apply wax on glossy finish only. Protect the vehicle with a cover to prevent dust accumulation during storage. CAUTION: The snowmobile has to be stored on a cool and dry place and covered with an opaque tarpaulin.

  • Page 85: Storage And Preseason Preparation

    It is during summer, or when a snowmobile is not in use for more than one month, that proper storage is a necessary. To prepare your snowmobile, refer to an authorized SKI-DOO dealer. CAUTION: Do not run engine during storage period.
  • Page 86 _________________________...

  • Page 87: Warranty

    WARRANTY __________________________...

  • Page 88: Brp Limited Warranty North America: 2006 Ski-Doo

    All genuine Ski-Doo parts and accessories, installed by an authorized BRP dealer (as hereinafter defined) at the time of delivery of the 2006 Ski-Doo snowmobile, carry the same warranty as that of the snow- mobile. Use of the product for racing or any other competitive activity, at any point, even by a previous owner, will render this warranty null and void.
  • Page 89 BRP’s obligations under this warranty are limited to, at its sole discre- tion, repairing parts found defective under normal use, maintenance and service, or replacing such parts with new genuine Ski-Doo parts without charge for parts and labor, at any authorized BRP dealer dur- ing the warranty coverage period.
  • Page 90 • Operation with fuels, oils or lubricants which are not suitable for use with the product (see the Operator’s Guide); • Snow or water ingestion; • Incidental or consequential damages, or damages of any kind in- cluding without limitation towing, storage, telephone, rental, taxi, inconvenience, insurance coverage, loan payments, loss of time, loss of income;...
  • Page 91 If the issue has not yet been resolved, please submit your com- plaint in writing or call the appropriate number below: IN CANADA: BOMBARDIER RECREATIONAL PRODUCTS INC. SKI-DOO CONSUMER SERVICES GROUP VALCOURT QC J0E 2L0 Tel: (819) 566-3366 IN USA: BRP US Inc.

  • Page 92: Brp International Limited Warranty: 2006 Ski-Doo

    All genuine Ski-Doo parts and accessories, installed by an authorized BRP distributor/dealer (as hereinafter defined) at the time of delivery of the 2006 Ski-Doo snowmobile, carry the same warranty as that of the snowmobile. Use of the product for racing or any other competitive activity, at any point, even by a previous owner, will render this warranty null and void.
  • Page 93 BRP distributor/dealer. Moreover, this warranty coverage is only available if the Ski-Doo snowmobile is purchased in the country or union of countries in which the purchaser resides. BRP will not honor this limited warranty to any private use owner or commercial use owner if the preceding conditions have not been met.
  • Page 94 EXCLUSIONS The following are not warranted under any circumstances: • Normal wear and tear; • Routine maintenance items, tune ups, adjustments; • Damage caused by failure to provide proper maintenance and/or storage, as described in the Operator's Guide; • Damage resulting from removal of parts, improper repairs, ser- vice, maintenance, modifications or use of parts not manufac- tured or approved by BRP or resulting from repairs done by a person that is not an authorized servicing BRP distributor/dealer;...
  • Page 95 If the matter still remains unresolved then contact BRP at the address listed below. BOMBARDIER RECREATIONAL PRODUCTS INC. SKI-DOO CONSUMER SERVICES GROUP VALCOURT QC J0E 2L0 Tel: 1 (819) 566-3366 ©...

  • Page 96: Privacy Obligations/Disclaimer

    PRIVACY OBLIGATIONS/DISCLAIMER We wish to inform you that your coordinates will be used for safety and warranty purposes. Sometimes, we also use the coordinates of our clients to inform them about our products and to present them offers. Should you prefer not to receive information on our products, services and offers, please let us know by writing to the address below.

  • Page 97: Change Of Address Or Ownership

    Please provide your name, address, phone number, vehicle serial number and date of theft. BRP will provide a list of stolen units to all authorized SKI-DOO deal- ers on a monthly basis to aid in recovery of such units to their owners.
  • Page 98 _________________________...
  • Page 99 __________________________...
  • Page 100 _________________________...
  • Page 101 __________________________...
  • Page 102 _________________________...

Table of Contents