Canon Pixma G1000 series Online Manual page 40

Note
• When inserting the tank cap, be careful not to twist the tank cap rubber.
9. Close the ink tank cover.
Important
• If you cannot properly close the ink tank cover, check if you forgot to insert any tank caps of the
ink tanks. If the tank cap is left on the tank cap holder, the ink tank cover cannot be closed.
10. Lift the top cover once, and then close it gently.
Note
• If the remaining ink level notification function is enabled, the Alarm lamp is lit when ink runs out.
This setting is enabled by default.
• If the lamp is lit, perform the following.
• To continue enabling the remaining ink level notification function
Hold down the RESUME/CANCEL button for at least 5 seconds. The Alarm lamp goes off and
the remaining ink level counter is reset.
• To disable the remaining ink level notification function
40