Table of Contents
Advertisement
Available languages
Available languages
Quick Links
HT-380BPC, 8800BPC, 9700C OM.qxd
Owner's Manual
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1.
Use this fan only as described in this
manual. Other use not recommended
may cause fire, electric shock or injury to
persons.
2.
This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3.
To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4.
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended to
fit only one way in a polarized outlet. If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT
attempt to defeat this safety feature.
5.
Close supervision is necessary when any
appliance is used by or near children.
6.
Turn the fan to the OFF position and
unplug the fan from the outlet when not in
use, when moving the fan from one
location to another, before cleaning and
before removing the fan grille.
The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.
10/16/08
11:42 AM
T
F
ECH
ORCE
P
H
OWER
IGH
HT-380 Series
HT-8800 Series
HT-9700 Series
7.
To disconnect the fan, first turn control to
the OFF position, grip the plug and pull it
from the wall outlet. Never pull by the
cord.
8.
Do not operate the fan in the presence of
explosive and/or flammable fumes.
9.
Do not place the fan or any parts near an
open flame, cooking or other heating
appliance.
10. Do not operate the fan with a damaged
cord or plug or if the product
malfunctions, is dropped or damaged in
any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not
recommended by the manufacturer may
be hazardous.
13. Place the fan on a dry level surface.
14. Do not operate if the fan housing is
removed or damaged. Do not operate the
fan if the grille is removed or not properly
assembled.
15. Do not operate on desktops or tabletops.
This fan is intended for use on floors
only.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace a
loose or worn outlet.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With Any
Solid-State Speed Control Device.
Page 1
V
F
ELOCITY
ANS
Advertisement
Table of Contents
Related Manuals for Honeywell HT-380BP - High Velocity Air Circulator Floor Fan
Summary of Contents for Honeywell HT-380BP - High Velocity Air Circulator Floor Fan
- Page 1 The Honeywell trademark is used by Kaz, Inc. under license from Honeywell International Inc.
- Page 2 ANY desired angular output (Fig.1). Upon using this fan, you will feel a strong and powerful air stream that will quickly move air in order to cool an area rapidly and efficiently.
- Page 3 • Plug the power cord into a polarized 120 volt AC wall outlet. • To operate your Tech Fan, press the control button once to turn the fan on in high speed (III), press a second time to change to medium speed (II), press a third time to change fan to the low speed (I), press a fourth time to turn the fan off (Fig.
-
Page 4: Cleaning And Storage
CLEANING AND STORAGE Unplug the fan before cleaning. • These fans are equipped with a cord wrap feature for storage on the bottom of the fan (Fig. 8). • Use only a soft, damp cloth to gently wipe the fan clean. -
Page 5: Limited Warranty
Customer Care Center and receive product information updates and new promotional offers. B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. © 2008 Kaz, Incorporated. All Rights Reserved. -
Page 6: Importantes Instructions De Sécurité
5. Une étroite surveillance est recommandée lorsque d’utiliser une commande de vitesse tout appareil est utilisé en présence d'un enfant transistorisée avec le ventilateur. ou par un enfant. La marque de commerce Honeywell est utilisée par Kaz, Inc. avec l'autorisation de Honeywell International Inc. - Page 7 Nos ventilateurs favorisent la distribution de l’air frais sortant des systèmes de climatisation ou de l’air chaud produit par les appareils de chauffage. Ils créent un tourbillon d’air qui augmente votre confort. Une circulation d’air accrue permet d’utiliser les systèmes de climatisation et de chauffage à...
- Page 8 8800-3 vitesses, Élevée (III), Moyenne (II) ou Basse (I) (Fig. 5). • Ajuster les ventilateurs à la position désirée. (Fig. 6). • Pour déplacer le ventilateur : le mettre hors tension (O) puis le soulever à l’aide de la poignée (Fig. 7). Fig. 5 Fig.
-
Page 9: Nettoyage Et Entreposage
• Coucher soigneusement le ventilateur sur une table, côté avant contre la table (Fig. 9). • Enlever la grille frontale : dévisser pour ceci les vis qui se trouvent à l’arrière de la tête de ventilation à l’aide d’un tournevis standard (Phillips) à pointe cruciforme. -
Page 10: Garantie Limitée
Cette garantie ne s'applique pas aux dégâts problème. Inclure une preuve d'achat et un découlant d'un usage commercial, abusif ou chèque ou un mandat de poste de 10,00 $ déraisonnable, ni aux dégâts supplémentaires. US/15,50 $ Can. pour les frais de manutention, Les défaillances résultant de l’usure normale...