Resetting The Switch - Motorola EX-3524 Installation Manual

26
3. Configure the PC's COM port required settings using VT-100 terminal emulator software (such as
HyperTerminal) running on the management PC. The switch's default console port settings are:
• 115200 bps, 8 data bits, 1-stop bit and no parity
4. Log in to the command-line interface (CLI) using one of the default user login settings:
• username: admin
• password: admin123
or
• username: guest
• password: guest
The guest default user login will only allow a user to view switch
NOTE
parameter data.
For a detailed description of connecting to the console and using the switch's command line interface (CLI), refer
to the CLI Reference Guide.

4.2 Resetting the Switch

The Reset button, located on the rear panel of the switch, can be used to restart the device and set the
configuration back to either the current saved configuration file or the factory default settings.
Press the reset button from 3 to 6 seconds to restart the system software using the current saved configuration file.
Press the reset button for 6 seconds or more to restart the system software using the factory default settings.
EX-3524/EX-3548 Layer 2 Gigabit Ethernet PoE/PoE+ Switch