Overview; Operating Modes; Battery And Charging - DEEPBLU COSMIQ DIVE COMPANION Product Manual

Table of Contents

SECTION 4 - OVERVIEW

The functions of the COSMIQ Dive Companion are organized into 6 operating modes. You can

always tell which mode COSMIQ is in by looking at the icon indicator at the top of the display screen.

COSMIQ Operating Modes

• Watch Mode: The default mode for COSMIQ. Time and date are displayed along with the

battery level indicator. COSMIQ will enter Standby after 20 seconds of inactivity in Watch

Mode. The Dive Plan function can be accessed from this mode.

• Scuba Mode: COSMIQ measures current depth, dive time, water temperature and performs

all decompression calculations. It also monitors ascent rate and determines required stop

times. COSMIQ monitors CNS oxygen toxicity and initiates visual and audible alarms to warn

of potentially dangerous situations. Divers can pre-set the oxygen level between 21% and 40%

and set a depth and/or time alarm.

• Gauge Mode: COSMIQ acts as a depth gauge and timer ONLY. It does not perform any

calculations related to decompression, saturation or desaturation. Scuba Mode will be locked

for 24 hours after a dive in Gauge Mode.

• Freedive Mode: COSMIQ measures current depth, dive time and water temperature.

Freedivers can set a Max Depth and/or Max Time alarm.

• Log Mode: Allows you to access all dive data from previous dives. Maximum depth, dive time,

water temperature, time in, date and the number of the dive are all displayed for each saved

dive.

• Sync Mode: Use this mode to upload dive data from COSMIQ to the Deepblu app via

Bluetooth. The firmware version that your COSMIQ is running is indicated in the bottom right

corner of the screen.

COSMIQ has a lithium-ion battery that is rechargeable using the magnetic USB connector, which is

compatible with all standard USB inputs.

Charge COSMIQ before using it. To charge COSMIQ, connect the magnetic USB cable with the

gold-plated contact points on the bottom of COSMIQ and plug the USB charging cable into any

standard USB port. Check the screen to ensure that the battery indicator is running on the battery

icon. COSMIQ will enter into Standby during the charge period, but it will continue charging.

COSMIQ displays a battery power indicator that allows you to track the amount of battery power at

all times and to give you advance warning of an impending need to charge the battery. The battery

power indicator is visible in the top right hand corner of COSMIQ's display screen in all modes

except for Standby.

BACK TO INDEX

Table of Contents