Section 4 - Overview; Operating Modes; Battery And Charging - DEEPBLU cosmiq+ Product Manual

SECTION 4 – OVERVIEW
SECTION 4 – OVERVIEW

4.1 OPERATING MODES

The functions of the COSMIQ
always tell which mode COSMIQ
COSMIQ Operating Modes
+
• Watch Mode: The default mode for COSMIQ
battery level indicator. COSMIQ
Mode. The Dive Plan function can be accessed from this mode.
• Scuba Mode: COSMIQ
all decompression calculations. It also monitors ascent rate and determines required stop
times. COSMIQ monitors CNS oxygen toxicity and initiates visual and audible alarms to warn
+
of potentially dangerous situations. Divers can pre-set the oxygen level between 21% and 40%
and set a depth and/or time alarm.
• Bottom Timer Mode: COSMIQ
calculations related to decompression, saturation or desaturation. COSMIQ
track of your average depth and displays a secondary dive time, both of which can be reset
by pressing the ADJUST button. Scuba Mode will be locked for 24 hours after a dive in
Bottom Timer Mode. Note that this mode is not available in the original COSMIQ model that
preceded the COSMIQ
• Freedive Mode: COSMIQ
Freedivers can set a Max Depth and/or Max Time alarm.
• Log Mode: Gives access to dive data from previous dives. Maximum depth, dive time, water
temperature, run time, date and the number of the dive are all shown for each saved dive.
• Sync Mode: Use this mode to upload dive data from COSMIQ
tooth. The firmware version that your COSMIQ
corner of the screen.

4.2 BATTERY AND CHARGING

COSMIQ has a lithium-ion battery that is rechargeable using the magnetic USB connector, which is
+
compatible with all standard USB inputs.
Charge COSMIQ before using it. To charge COSMIQ
+
gold-plated contact points on the bottom of COSMIQ
standard USB port. Check the screen to ensure that the battery indicator is running on the battery
will enter into Standby during the charge period, but it will continue charging.
icon. COSMIQ
+
COSMIQ displays a battery power indicator that allows you to track the amount of battery power at
+
all times and to give you advance warning of an impending need to charge the battery. The battery
power indicator is visible in the top right hand corner of COSMIQ
except for Standby.
BACK TO INDEX
Dive Computer are organized into 6 operating modes. You can
+
is in by looking at the icon indicator at the top of the screen.
+
will enter Standby after 20 seconds of inactivity in Watch
+
measures current depth, dive time, water temperature and performs
+
acts as a gauge and timer ONLY. It will not perform any
+
.
+
measures current depth, dive time and water temperature.
+
. Time and date are displayed along with the
+
to the Deepblu app via Blue-
+
is running is indicated in the bottom right
+
, connect the magnetic USB cable with the
+
and plug the USB charging cable into any
+
's display screen in all modes
+
11
also keeps
+