Table of Contents
Advertisement
SECTION 4 - OVERVIEW
After pairing COSMIQ with your phone, you must choose your preferred settings. Navigate to
Sync Mode on COSMIQ using the MODE button.
For the Deepblu iOS app:
Access the main menu of the Deepblu app and choose Settings. Press Next.
For the Deepblu Android app:
Choose Settings from the COSMIQ Options menu.
In the Settings menu you can change the following:
General
• COSMIQ Firmware: Periodic firmware upgrades to COSMIQ's operating system will be made
available for download. Press Update to upgrade the firmware on your COSMIQ. The current
firmware version is V0.7.
• Screen Timeout: Adjust the time before COSMIQ reverts to Standby in Watch Mode. The
default is 20 seconds.
• Measurement Units: Change the distance and temperature units from the Metric system
(meters/°C) to the Imperial system (feet/°F). The default is the Metric system.
• Date Display: Choose to have the current date or the date of your last dive displayed in
Watch Mode. The default setting is to display the current date.
• Default Underwater Mode: Set the mode COSMIQ will activate upon entering the water to
Scuba Mode, Gauge Mode or Freedive Mode. The default underwater mode is first set to
Scuba Mode.
Scuba Mode
• Safety Factor: Choose to alter COSMIQ's algorithm to Conservative, Normal or Progressive.
The default is Normal.
• Partial Pressure of Oxygen (PPO
The default is 1.4 bar.
• Air Mix: Choose the oxygen level based on the type of gas being used in your cylinder
(Standard Air or Nitrox). The minimum is 21% and the maximum is 40%. This setting can also be
adjusted manually using COSMIQ. The default is 21%.
• Time Alarm: Set an alarm to sound once you reach a certain dive time. You can set the Time
Alarm between 10 minutes and 2 hours. The default Time Alarm is 1 hour.
• Depth Alarm: Set an alarm to sound once you reach a certain depth. You can set the Depth
Alarm between 18 meters/60 feet and 50 meters/165 feet. The default Depth Alarm is 40
meters/131 feet.
Freedive Mode
• Max Time Alarm: Set an alarm to sound once you reach a certain dive time. The Max Time
Alarm can be set from 30 seconds to 3 minutes. The default is set at 1 minute and 30 seconds.
This setting can also be adjusted manually using COSMIQ.
• Max Depth Alarm: Set an alarm to sound once you reach a certain depth. The Max Depth
alarm can be set from 15 meters/50 feet to 80 meters/265 feet. The default is 15 meters/50
feet. This setting can also be adjusted manually using COSMIQ.
Choose all of your preferred settings while COSMIQ is in Sync Mode and they will be
automatically uploaded to COSMIQ. The running rectangle on COSMIQ indicates that your
settings are being synced. Once the sync is complete COSMIQ is ready to use.
BACK TO INDEX
): Change the maximum PPO
2
14
limit from 1.2 bar to 1.6 bar.
2
Advertisement
Table of Contents
