Do you have a question about the COSMIQ+ and is the answer not in the manual?
Questions and answers
Carlos
March 31, 2025
Como se pone en hora la computadora
1 comments:
Mr. Anderson
March 31, 2025
To set the time alarm on the DEEPBLU COSMIQ+ computer:
1. Enter Freedive Mode using the MODE button. 2. Press the ADJUST button to access alarm settings. 3. After setting the depth alarms, press ADJUST repeatedly to set the time alarm between 30 seconds and 10 minutes. 4. Press the MODE button to save changes and return to Freedive Mode.
To cycle through time values quickly, press and hold the ADJUST button.
Contents Overview COSMIQ versus COSMIQ Key features Safety information Safely diving with your COSMIQ Alarms Dive alarms table Operating your COSMIQ Buttons and navigation Operating modes Setting up your COSMIQ with your mobile device Pairing your COSMIQ with your mobile device Adjusting the settings 4.3 Updating the firmware...
Page 3
5.3.1 Entering the water 5.3.2 During your dive 5.3.3 After your dive Diving in Freediving Mode 5.4.1 Setting time and depth alarms 5.4.2 Entering the water 5.4.3 During your dive After your dive Checking your dive logs COSMIQ maintenance Battery and charging Taking care of your COSMIQ Safe disposal Technical specifications...
Dive Computer is designed to bring an entirely hassle-free diving experience to scuba divers and freedivers. The COSMIQ is easy to read and operate and synchronizes wirelessly with the Deepblu app, allowing you to effortlessly create OVERVIEW OVERVIEW digital dive logs that you can keep as a memory or share with your peers.
SAFETY SAFETY If you have any questions about your COSMIQ Dive Computer, please ask your COSMIQ Reseller, speak to a qualified dive instructor, or contact Deepblu at support@deepblu.com. OPERATION 2.1 Safely diving with your COSMIQ DO NOT use your COSMIQ+ as your primary dive computer if you plan to do a PAIRING technical dive (i.e.
Deepblu strongly advises that you consult a doctor before diving to determine your fitness for diving. Using the COSMIQ+ does not replace the need for other instruments. The COSMIQ+ is intended to supplement the use of other instruments, including a depth gauge, pressure gauge, timer and watch.
Page 7
Dive Computer COSMIQ CNS >= 85% ∙ ∙ 10 beeps per 3 seconds End the dive. Conduct a safety stop and ascend to ∙ ∙ CNS flashing the surface. ∙ ∙ Arrow indicator flashing Maximum Operation ∙ ∙ Continuous beeping Ascend above the MOD. Depth (MOD) Exceeded Consider ending the dive.
SAFETY inactivity to conserve battery power. While the screen goes blank, the computer is still active. Press any button to activate your COSMIQ+ and turn on the display. You can adjust the standby timeout in the Deepblu app. OPERATION OPERATION...
Page 10
: Gives access to dive data from previous dives. ∙ ∙ Sync Mode : Allows you to sync your COSMIQ with the Deepblu app to transfer dive data and change the settings. Shows an overview of your device’s settings and current firmware version. OVERVIEW...
You MUST synchronize with the Deepblu app to adjust the time and date, change the settings, synchronize dive data, and register the product for warranty purposes.
Synchronize your dive data from your COSMIQ with the Deepblu app to create digital dive logs that will be safely stored into the Deepblu cloud. These interactive dive logs WARRANTY can hold your underwater photography and memories and can be shared with your buddies.
Page 13
Enable the Blue-tooth setting on your mobile device. Make sure the two devices are close to each other. Access the Deepblu app on your mobile device. In the main menu of the Deepblu app, press Your Dive Computers. Wait for the connection to be established.
It is important that you check these carefully before CARE entering the water as no settings can be changed during a dive. Except for the oxygen level in your air mix, all settings must be set using the Deepblu app. SPECS WARRANTY...
Page 15
SPECS conservativeness based on your personal preference and unique risk factors. The Safety Factor can only be changed through the Deepblu app, but you can check in Scuba Mode. Look for the letters SF: followed the current setting on your COSMIQ...
Scuba Mode once you descend past 1.5 m (5 ft).. You can tell if the current mode is the default mode when the letters dF show. This setting can be adjusted in the Deepblu app. SAFETY NOTE: Because your COSMIQ...
Dive Computer COSMIQ OVERVIEW SAFETY OPERATION 5.2.4 After your dive PAIRING Upon surfacing from a dive, or when you are shallower than 2 m (6 ft), your COSMIQ will remain in Scuba Mode for 5 minutes. If you surface for fewer than 5 minutes and then descend again, your COSMIQ will consider this a continuation of the previous DIVING...
Dive Computer COSMIQ COSMIQ is locked, Scuba Mode will be inactive and any dive attempted during a lock will be conducted in Bottom Timer Mode. When the No-Dive Time has elapsed, Scuba Mode will become available again. 5.2.5 Warnings during the dive Your COSMIQ will also alert you about potentially dangerous situations with sound and on-screen warnings.
Page 19
Dive Computer COSMIQ right side of the screen. NDL Bar No-Decompression Time Limit 0 bars NDL exceeded 1 bar 0–5 min 2 bars 5–15 min OVERVIEW 3 bars 15–30 min 4 bars 30–60 min SAFETY 5 bars > 60 min OPERATION Your COSMIQ will beep when you are 3 minutes away from reaching your no-...
Dive Computer COSMIQ Central Nervous System (CNS) oxygen toxicity danger If your COSMIQ calculates a CNS oxygen toxicity level of 80%, the letters CNS will flash on the screen along with an arrow indicator instructing you to ascend to a shallower depth. The alarm will increase in frequency if you fail to do so and as the toxicity level reaches 85%.
2 m (6 ft) of water pressure. You can tell if the current mode is the default mode when the letters dF show. This setting can be adjusted in the Deepblu app. If it is not your default dive mode, simply navigate to Bottom Timer Mode and dive to OVERVIEW 2 m (6 ft) of depth before the timeout of 3 minutes has elapsed.
You can set three depth alarms and one time alarm in Freedive Mode. These can be set directly on the COSMIQ or using the Deepblu mobile app. To set depth and time alarms on your COSMIQ , navigate to Freedive Mode using WARRANTY the MODE button.
This setting SAFETY can be adjusted in the Deepblu app. If it is not your default dive mode, simply navigate to Freedive Mode. Your COSMIQ Freedive Mode will stay in for 30 minutes.
Page 24
Dive Computer COSMIQ OVERVIEW SAFETY OPERATION 5.4.4 After your dive PAIRING When surfacing or upon reaching 0 m (0 ft) in Freedive, your COSMIQ will immediately consider the dive over. For other dives this occurs at 1.2m (4 ft). There is no grace period.
If you have over 25 logs and you haven’t synchronized your previous logs to the OPERATION Deepblu app, the letters MAX will appear on the bottom of the screen and the Sync Mode icon will flash in Watch Mode. Perform a synchronization to avoid losing your logs.
Your COSMIQ ships with two screen protectors. When you run out, you can order more from the Deepblu Shop or cut any screen protector to the right size. However, Deepblu does recommend using the thicker type WARRANTY as they offer better protection.
Please locate the nearest recycling facility that accepts electronic waste or send the device back to us for disposal. At Deepblu, we prize efforts to protect the environment and will do what is necessary to minimize any impact.
Standard Air and Nitrox, with the oxygen level OVERVIEW Gases adjustable between 21%–40% Partial Oxygen Pressure (PPO Adjustable between 1.2 bar and 1.6 bar SAFETY Deepblu Decompression Algorithm based on the Algorithm Bühlmann ZHL-16C model OPERATION Safety Factors Conservative, Normal, Progressive PAIRING...
Page 29
Dive Computer COSMIQ Enhanced Black Twisted Nematic (EBTN) Screen Technology Negative Image LCD Display ∙ ∙ 24-mm Ballistic Nylon NATO watch strap Strap Material ∙ ∙ Bungee cord 70.6 mm (2.78”) x 48.6 mm (1.91”) x 20.9 mm Dimensions (0.82”) OVERVIEW Weight Approximately 81 g (2.86 oz)
Warranty. OVERVIEW The warranty period begins on the day when your COSMIQ is first activated by syncing with the Deepblu app. Make sure you are logged in to your personal Deepblu SAFETY account when syncing to link your COSMIQ to your account. If you experience a fault with your COSMIQ within the warranty period, please submit a warranty claim through the Deepblu website to apply for a replacement.
Dive Computer COSMIQ 10. Glossary Ascent rate The speed (measured in meters/feet per minute) at which a diver ascends towards the surface. Ceiling depth The shallowest depth to which a diver can ascend to complete a mandatory decompression stop. OVERVIEW Central nervous A measurement of the level of oxygen exposure in the system (CNS) oxygen...
Page 32
Dive Computer COSMIQ Oxygen level The percentage of oxygen contained in a breathing mix. Partial pressure of The total pressure exerted by oxygen in a breathing mix. oxygen (PPO2) It is a measurement of the concentration of oxygen in a gas mixture.
Need help?
Do you have a question about the COSMIQ+ and is the answer not in the manual?
Questions and answers
Como se pone en hora la computadora
To set the time alarm on the DEEPBLU COSMIQ+ computer:
1. Enter Freedive Mode using the MODE button.
2. Press the ADJUST button to access alarm settings.
3. After setting the depth alarms, press ADJUST repeatedly to set the time alarm between 30 seconds and 10 minutes.
4. Press the MODE button to save changes and return to Freedive Mode.
To cycle through time values quickly, press and hold the ADJUST button.
This answer is automatically generated