Table of Contents
Advertisement
SECTION 5 - INSTRUCTIONS FOR USE
Dive Alarms Table
Situation
Safe Ascent Rate
Exceeded
CNS=80%
CNS=85%
MOD Exceeded
No Decompression Limit
Approaching
No Decompression Limit
Exceeded
Battery Power Low
COSMIQ Shutting Down
Max Depth (Freedive
Mode)
Max Time
(Freedive Mode)
Surface Interval Alarm
(Freedive Mode)
Depth Alarm
(Scuba Mode)
Time Alarm
(Scuba Mode)
BACK TO INDEX
Visual/ Sound Alarm
-Continuous beeping
-Ascent rate bar full
-5 beeps per minute
-'CNS' flashing
-Arrow indicator flashing
-10 beeps per 3 seconds
-'CNS' flashing
-Arrow indicator flashing
-Continuous beeping
-'PO2' flashing
-Arrow indicator flashing
-3 minutes left : 3 beeps
-2 minutes left: 3 beeps
-1 minute left: 5 beeps
-10 beeps for 20 seconds, 10
second pause, repeat for 3
minutes
-Arrow indicator flashing
-Stop indicator and Stop
Countdown Time flashing
-Ceiling indicator and Ceiling
Depth value flashing
-1 beep every minute
-1 beep
-Continuous beeping until
you ascend above the set
depth
-6 cycles of 3 beeps
-2 cycles of 2 beeps (surface
interval half completed)
-2 cycles of 3 beeps (surface
interval completed)
-6 cycles of 2 beeps
-6 cycles of 3 beeps
30
Action
Slow ascent until alarm stops.
End the dive. Conduct a safety stop
and ascend to the surface.
End the dive. Conduct a safety stop
and ascend to the surface.
Ascend above the MOD. Consider
ending the dive.
Ascend to a shallower depth.
Perform a mandatory decompres-
sion stop. Ascend to the Ceiling
Depth indicated in the bottom left
corner of COSMIQ and stay there
until the Stop Countdown Time is
over. Do not ascend above the Ceil-
ing Depth until the Stop Countdown
Time is over.
Charge COSMIQ as soon as possi-
ble.
Charge COSMIQ immediately.
Advertisement
Table of Contents
