Tips - Marantz PM6006 Owner's Manual

Contents Connections

Tips

I want to play back high quality television sound
Connect the digital audio output connector of the TV to the digital audio input connector (COAXIAL or OPTICAL 1/2) of this unit, and switch the input
0
source to the connected (COAXIAL or OPTICAL 1/2) connector. (v p. 22)
This unit can play back 2 channel linear PCM digital audio signals.
0
I want to adjust the tone myself
Use the BASS, TREBLE and BALANCE knobs to adjust the sound as desired. (v p. 27)
0
I want sound playback that is faithful to the original sound
Set the Source Direct mode on. (v p. 28)
0
I want to hear music that is close to the original sound quality at low volume
Turn the LOUDNESS mode on. (v p. 28)
0
I want to operate a Marantz CD player or network audio player using the remote control of this unit
Switch the remote control operating mode. ("CD player operations" (v p. 12), "Network audio player operations" (v p. 14))
0
Also refer to the CD player or network audio player instruction manuals.
0
I want to use more than one unit in one location
Set individual remote control codes for each combination of devices and remote control. (v p. 35)
0
Front panel Rear panel
Playback Settings
37
Remote control
unit
Tips
Index
Appendix