Appendix - Marantz PM6006 Owner's Manual

Contents Connections
o No sound comes out
Symptom
No sound comes out of
0
speakers.
0
0
0
0
0
0
0
0
0
The COAXIAL or OPTICAL
0
1/2 input indicator is
0
flashing.
o Desired sound does not come out
Symptom
No sound comes out of a
0
specific speaker.
0
The left and right of stereo
0
sound is reversed.
Front panel Rear panel
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
Securely tighten the speaker terminals. Check speaker terminals for looseness.
Check that the proper input source is selected.
Adjust the master volume.
Cancel the muting mode.
Check the settings of the SPEAKERS A/B button.
Check the connection of the Coaxial digital cable or Optical cable.
Set the Digital Audio output signal of the connected device to 2 channel linear PCM.
Check that speaker cables are properly connected.
Adjust the BALANCE control knob.
Check whether the left and right speakers are connected to the correct speaker terminals.
Remote control
unit
Settings
Cause / Solution
Cause / Solution
40
Index
Tips

Appendix

Page
Page
16
－
－
－
17
17
27
27
27
27
22
42
17
27
17