Attachments/Accessories; Operation; Think Safety First; Checking The Engine Oil Level - Toro 04018 Greensmaster Flex 18 Operator's Manual

Height of cut 1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
bedknife
Clip frequency 11 blade
(standard): .14
in.

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.

Operation

1/16 to 19/64
inches (1.5 to 7.5
mm) with Micro-Cut
Note: Determine the left and right sides of the
bedknife
machine from the normal operating position.
11 blade
(standard): .14
inch

Think Safety First

Please carefully read all of the safety instructions and
decals in the safety section. Knowing this information
could help you or bystanders avoid injury.

Checking the Engine Oil Level

Check the engine oil level before each use or every 8
operating hours, refer to Checking the Engine Oil Level
in Engine Maintenance , page 22.

Filling the Fuel Tank

Important: Never use methanol, gasoline
containing methanol, gasohol containing more
than 10% ethanol, gasoline additives, premium
gasoline, or white gas because the fuel system
could be damaged. Do not mix oil with gasoline.
1. Fuel tank cap
16
Figure 17
Gasoline is harmful or fatal if swallowed.
Long-term exposure to vapors can cause serious
injury and illness.
• Avoid prolonged breathing of vapors.
• Keep face away from nozzle and gas tank or
conditioner opening.
• Keep gas away from eyes and skin.
2. Fuel gauge