Specifications - Toro 04018 Greensmaster Flex 18 Operator's Manual

or transporting machine. Open valve before starting
engine.
Recoil Starter
Pull recoil starter handle (Figure 15) to start engine.
1. Recoil starter
2. On/off switch
On/Off Switch
The on/off switch (Figure 15) is located on rear of
engine. Move switch to On position to start engine and
Off to stop engine.
Hour Meter
The hour meter (Figure 15) located on rear of engine,
indicates the total hours of machine operation.
Kickstand
The kickstand (Figure 16) is mounted to rear of machine
and is used to raise rear of machine for installation or
removal of transport wheels.
Figure 15
3. Hour meter
1. Kick stand

Specifications

Flex 21
Width 35-1/2 inches (90.1
cm)
Height 41–1/4 inches
(104.8 cm)
Length with basket 61–1/2 inches
(156.2 cm)
Weight with full 267lb (121 kg)
fluids and basket
Dry weight with 256lb (116 kg)
basket
Engine Kawasaki, 4-cycle,
3.7 (2.7 kw) air
cooled OHV
engine, 3600
RPM, 7.57 cu
inch (124 cc)
displacement, cast
iron cylinder sleeve;
electronic ignition
with integral lighting
coil; maximum
noise suppression
muffler; 85 dB(A) at
operator's ear
Fuel capacity
2.64 qt. (2.5
l); regular grade
unleaded gasoline
Ground speed Mowing speed: 1.3
to 3.3 MPH (2.1 to
5.3 km/h)Transport
speed: 4.9
MPH (7.9 km/h)
maximum
Width of cut 21 inches (53.3 cm) 18 inches (45.7 cm)
15
Figure 16
Flex 18
32 inches (81.3 cm)
41–1/2 inches
(105.4 cm)
61 inches (155 cm)
261lb (118 kg)
250lb (113 kg)
Kawasaki, 4-cycle,
3.7 (2.7 kw) air
cooled OHV
engine, 3600
RPM, 7.57 cu
inch (124 cc)
displacement, cast
iron cylinder sleeve;
electronic ignition
with integral lighting
coil; maximum
noise suppression
muffler; 85 dB(A) at
operator's ear
2.64 qt. (2.5
l); regular grade
unleaded gasoline
Mowing speed: 1.3
to 3.3 MPH (2.1 to
5.3 km/h)Transport
speed: 4.9
MPH (7.9 km/h)
maximum