Specifications - Toro GROUNDSMASTER 580-D 30581 Operator's Manual

Specifications
CUTTING UNITS
Cutting Unit Drive System: All hydraulic drive. Initial
cutting drive engagement via electric switch. Drive shuts off
or engages individually as cutting units are raised or
lowered.
Automatic Weight Transfer: Patented automatic weight
transfer from decks to traction unit under demanding
traction situations for improved traction and deck floatation.
Cutting Unit Configuration: A 234 cm Triflex front center
cutting unit and two 145cm outboard cutting units.
Mowing Rate/Width: Mows up to 5.9 hectares at 12.1
km/hr using all cutting units (assumes no overlap and
stops).
Total Cutting Width: 488 cm.
Height-of-Cut Range: 2.5–10.2 cm. High 6.3–14 cm.
Blades: Interchangeable heat-treated steel blades, 50.8 cm
long, 6.3 mm thick and 6.3 cm wide. Five blades on the
Triflex and three each on the outboard unit.
Anti-scalp Devices: Cutting units equipped with adjustable
skids. Anti-scalp cup on each blade assembly.
TRIFLEX CUTTING UNIT (FRONT)
Type: Triflex front mounted rotary cutting unit with 5-blade
spindles and 234 cm width of cut.
Trimming Ability: Trims to either side. 20.3 cm cutting
unit offset from the outside of the wheel to trim side of
front cutting unit on either side.
Height-of-Cut Adjustment: 12.7 mm increments by
spacers on front castor shafts and clevis pins on rear wheel
forks.
Cutter Drive: Hydraulic gear motor. "BB" hex section belt
to center cutting unit spindles, "B" section belt to wings.
Splined shafts, each in two greaseable, tapered roller
bearings in cast iron housings (greaseable from the top).
Self-tensioning, permanently lubricated belt idlers.
Castor Wheels: Two 10.50 x 3.50 and two 12 x 5.00 heavy
duty, pneumatic castor wheels.
OUTBOARD CUTTING UNITS
Type: Two, three-spindle, side-mounted rotary cutting
units, each with a 145 cm width of cut.
Trimming Ability: Trims to either side. 147cm cutting unit
is offset from the outside of the wheel to trim the side of
side cutting units.
Height-of-Cut Adjustment: 12.7 mm increments by
spacers on all castor shafts.
Cutter Drive: Hydraulic gear motor. Three "B" section
belts to spindles.
Castor Wheels: Four 10.50 x 3.50 heavy-duty,
interchangeable, pneumatic castor wheels.
Cutting Unit Suspension: Outboard cutting unit arms pivot
from the center, sweep the cutting units forward in mow
and lift, and rotate the cutting units down and back when in
transport. Arms have rubber mount design for shock
absorption and more cutting unit floatation (patented).
Adjustable, spring-loaded, breakaway arms release and
rotate outboard cutting unit upon accidental impact.
Automatically reset when cutting unit is raised. Cam lock
links automatically secure outboard cutting units in
transport position.
Machine Width (Approx.):
Transport—241 cm.
Mow—495 cm.
Machine Height (Approx.):
Transport—231 cm—to the top of raised cutting units.
Mow—152 cm—to top of seat back.
Machine Overall Length (Approx.): 427 cm.
Total Weight (with fluids) [Approx.]: 2967 kg.
Accessories:
2-Post Roll-Over Protection System
Canopy option
Canopy w/windshield option
Cab with Roll-Over Protection System
Road Light Package
244 cm Rotary Broom
Air Conditioning
7-Foot Snow blower
9