System; Schedule Recording; Schedule Recording Setting - Nexcom NCr-302-VHR User Manual

Chapter 2: Camera Configuration

System

Schedule Recording

This section is used to schedule the recording of the video streams.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Schedule Recording Setting

Enable Schedule Recording
Enables or disables recording of the video stream. When enabled, you can
select to record the video stream to a SD card or to a Network Storage.
Daily
Configures the camera to record at the specified Start Time and End Time.
Weekly
Configures the camera to record on the specified day and time of the week.
S
Select this to set full-day recording.
D
Select this to cancel full-day recording.
E
Displays the end time of the recording, clicking E will allow you to configure
the start time and end time.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
64
NCr-302-VHR User Manual