Nexcom NCr-302-VHR User Manual page 17

Chapter 1: Product Introduction
4. Secure the connecting bracket to the camera's rear.
5. Press and hold down the latch on the wall mount bracket and put it into
the connecting bracket. Once in place, secure the other side using the
supplied hex wrench.
Press
Press
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
6. Align the mounting holes on the wall mount bracket to the mounting
holes on the wall mount plate, then secure it tightly with screws to finish
the installation.
7
NCr-302-VHR User Manual