Maintenance; Maintain; Camera Name Settings; Camera Configuration - Nexcom NCr-302-VHR User Manual

Chapter 2: Camera Configuration

Maintenance

This section is used to restart the IP camera, or restore it to default or factory
default settings.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Maintain

Restart
Click this button to reboot the camera.
Reset to Default
Click this button to restore all the camera's setting back to default except
for the network settings.
Reset to Factory Default
Click this button to restore all the camera's setting back to factory default
settings.

Camera Name Settings

Camera Name
Specify a name for the camera. The name will be displayed in the upper left
corner on the live video stream of the camera. To enable this, make sure the
option Display Camera Name in the Overlay Settings menu is checked.
For information on the Overlay Settings menu, please refer to page 23.

Camera Configuration

Export
Export all the configuration settings into a file and save it on the computer.
Import
Import a configuration file from the computer to the camera.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
46
NCr-302-VHR User Manual