Table of Contents
Advertisement
Chapter 2: Camera Configuration
System
Audio
This section is used to configure the audio settings.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Audio Settings
Audio In Enable
Enables or disables audio-in on the camera. When enabled, specify the
volume in the Audio In Volume textbox. The range is 1~100.
Audio Out Enable
Enables or disables audio-out on the camera. When enabled, specify the
volume in the Audio Out Volume textbox. The range is 1~100.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.
29
NCb-301 User Manual
Advertisement
Table of Contents
